Monitoring Station
- hotblast1357
- Member
- Posts: 5657
- Joined: Mon. Mar. 10, 2014 10:06 pm
- Location: Peasleeville NY
- Stoker Coal Boiler: 1984 Eshland S260 coal gun
- Coal Size/Type: Lehigh anthracite pea
- Other Heating: air source heat pump, oil furnace
Setup above the furnace
Attachments
-
- Member
- Posts: 57
- Joined: Tue. Mar. 11, 2014 5:18 pm
- Location: Wilkesbarre PA
- Hot Air Coal Stoker Stove: Keystoker 105 DV
- Coal Size/Type: Rice- Reading Anthracite
Is that duck tape on the joints.
- Ky Speedracer
- Member
- Posts: 492
- Joined: Sun. Dec. 21, 2014 9:38 pm
- Location: Middletown, Kentucky
- Hand Fed Coal Stove: Florence HotBlast NO.68 & Potbelly
- Hand Fed Coal Furnace: HotBlast 1557M
- Coal Size/Type: Ky Lump & Anthracite Nut
- Other Heating: Oil
Mine is pretty much the same as what you all have. It's monitored remotely with an old IPhone.
Attachments
- coalkirk
- Member
- Posts: 5185
- Joined: Wed. May. 17, 2006 8:12 pm
- Location: Forest Hill MD
- Stoker Coal Boiler: 1981 EFM DF520 retired
- Hand Fed Coal Stove: Jotul 507 on standby
- Coal Size/Type: Lehigh anthracite/rice coal
Lightning and hotblast1357...why do you have the Redi - Chek base and remote units next to each other? Kinda defeats the purpose doesn't it? Or am I missing something?
- hotblast1357
- Member
- Posts: 5657
- Joined: Mon. Mar. 10, 2014 10:06 pm
- Location: Peasleeville NY
- Stoker Coal Boiler: 1984 Eshland S260 coal gun
- Coal Size/Type: Lehigh anthracite pea
- Other Heating: air source heat pump, oil furnace
For picture purposes it shows both temps, and when tending I hang up it up there, I also take it with me when tending the baseburner in the garage.
- Lightning
- Site Moderator
- Posts: 14658
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
coalkirk wrote:Lightning and hotblast1357...why do you have the Redi - Chek base and remote units next to each other? Kinda defeats the purpose doesn't it? Or am I missing something?
Oh, I keep it up in the living room when I'm home. When I'm not home, it sits like how it is in the picture so my remote IP camera can see it and I can look at my furnace temps and draft gauge while I'm at work with my smart phone..