Chubby at 15 Hrs Into a Burn
- Formulabruce
- Member
- Posts: 288
- Joined: Sat. Feb. 02, 2013 8:02 pm
- Location: in the "Shire" ( New Hamp -shire)
- Hand Fed Coal Stove: Harmon Mark 1 Goldenfire
- Coal Size/Type: BLASHAK Nut and Stove size
- Other Heating: Blower from a gas furnace if I need to move air, no heat
So I used 15 lbs , there is about 5 lbs left to burn in the fire pot. If this keeps up I can heat for < 30lbs a day...
I had been using a box fan behind it and could not keep an even fire. The Chubby has no fire bricks, this means it can easily and quickly transfer heat to outside of the stove, cooling it. The Chubbys with the air tubes looks like the best way to grab heat, mostly from above the fire.
I have used the Rheem gas furnace "Blower only" a few times to even out the heat. so far the coal is doing its job )
- D-frost
- Member
- Posts: 1186
- Joined: Sun. Dec. 08, 2013 7:10 am
- Location: Southern New Hampshire
- Hand Fed Coal Stove: Harman MK ll
- Hand Fed Coal Furnace: Yukon Eagle I (multi-fuel oil, wood/coal)
- Baseburners & Antiques: Herald 'fireside oak'
- Coal Size/Type: nut/stove-Blaschak/Lehigh
FB,
Can't beat that! Looking good. My chubby has a blower, with a rheostat, that I run on a very slow speed to circulate the air. It goes 12-14 hours at 300-400 degrees on the top of the doggie ear.
My daughter got an Ecofan for her wood stove, for power outages. Works pretty good, it's slow speed. They are made in Canada. ($149.95 at Woodman's parts, $169.95 at Ace hardware) I'm ordering one Monday to have for 'no power' conditions. That option might work for you. Chubby is a heat making work of art. Gotta love a Chubby!
Cheers
Can't beat that! Looking good. My chubby has a blower, with a rheostat, that I run on a very slow speed to circulate the air. It goes 12-14 hours at 300-400 degrees on the top of the doggie ear.
My daughter got an Ecofan for her wood stove, for power outages. Works pretty good, it's slow speed. They are made in Canada. ($149.95 at Woodman's parts, $169.95 at Ace hardware) I'm ordering one Monday to have for 'no power' conditions. That option might work for you. Chubby is a heat making work of art. Gotta love a Chubby!
Cheers
- lsayre
- Member
- Posts: 21781
- Joined: Wed. Nov. 23, 2005 9:17 pm
- Location: Ohio
- Stoker Coal Boiler: AHS S130 Coal Gun
- Coal Size/Type: Lehigh Anthracite Pea
- Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75
The Ecofan may not work nearly as well with coal as for wood if the surface temperature of the stove is lower with coal.
- Photog200
- Member
- Posts: 2063
- Joined: Tue. Feb. 05, 2013 7:11 pm
- Location: Fulton, NY
- Baseburners & Antiques: Colonial Clarion cook stove, Kineo #15 base burner & 2 Geneva Oak Andes #517's
- Coal Size/Type: Blaschak Chestnut
- Other Heating: Electric Baseboard
You have a good point about the temp differences on the coal stoves so I went to do some investigating before I ordered one of these. They actually have different models that start working at different temps. The belair model starts working at 167°f. The top of my stove is usually warmer than that.lsayre wrote:The Ecofan may not work nearly as well with coal as for wood if the surface temperature of the stove is lower with coal.
http://www.woodmanspartsplus.com/16644/products/U ... ?d_id=4854
- lsayre
- Member
- Posts: 21781
- Joined: Wed. Nov. 23, 2005 9:17 pm
- Location: Ohio
- Stoker Coal Boiler: AHS S130 Coal Gun
- Coal Size/Type: Lehigh Anthracite Pea
- Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75
Nice! It pays to do the research.Photog200 wrote:You have a good point about the temp differences on the coal stoves so I went to do some investigating before I ordered one of these. They actually have different models that start working at different temps. The belair model starts working at 167°f. The top of my stove is usually warmer than that.lsayre wrote:The Ecofan may not work nearly as well with coal as for wood if the surface temperature of the stove is lower with coal.
http://www.woodmanspartsplus.com/16644/products/U ... ?d_id=4854
- Hambden Bob
- Member
- Posts: 8549
- Joined: Mon. Jan. 04, 2010 10:54 am
- Location: Hambden Twp. Geauga County,Ohio
- Hot Air Coal Stoker Stove: Harman 1998 Magnum Stoker
- Hand Fed Coal Stove: Blower Model Coal Chubby 1982-Serial#0097
- Coal Size/Type: Rice-A-Roni ! / Nut
- Other Heating: Pro-Pain Forced Air
'Das Right ! And this is the Place that it all comes together! First it was "The Chubbyhood"...Now,due to ongoing R&D,it's become "The Chubby Matrix" ! Larry Trainer never knew just what he hath spawned all those years ago,and now with the new,revised Nuclear Chubby available,The Legend Grows and Continues !
- Sunny Boy
- Member
- Posts: 25728
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
Larry, Randy,
Ask Kevin (Merc300d) how well his Ecofan does on his Glenwood #6 base heater.
Here's a pic he sent me recently with it looking like it's spinning pretty well.
Paul
Ask Kevin (Merc300d) how well his Ecofan does on his Glenwood #6 base heater.
Here's a pic he sent me recently with it looking like it's spinning pretty well.
Paul
Attachments
- Photog200
- Member
- Posts: 2063
- Joined: Tue. Feb. 05, 2013 7:11 pm
- Location: Fulton, NY
- Baseburners & Antiques: Colonial Clarion cook stove, Kineo #15 base burner & 2 Geneva Oak Andes #517's
- Coal Size/Type: Blaschak Chestnut
- Other Heating: Electric Baseboard
I was actually thinking of it on the cook stove so I don't have to run the ceiling fan when I am not out in the garage. On my BB stove the top is recessed so not sure how it would do in that situation. The motors are susceptible to over heating and I think this would not be a good application for it besides I keep a pot of water on it for humidity.
Randy
Randy
Attachments
- D-frost
- Member
- Posts: 1186
- Joined: Sun. Dec. 08, 2013 7:10 am
- Location: Southern New Hampshire
- Hand Fed Coal Stove: Harman MK ll
- Hand Fed Coal Furnace: Yukon Eagle I (multi-fuel oil, wood/coal)
- Baseburners & Antiques: Herald 'fireside oak'
- Coal Size/Type: nut/stove-Blaschak/Lehigh
Hello Merc300d,
I was going to order the Ecofan rated 185*-650*, #812 maxair, I believe. Which model do you have, and your opinion on how well it performs on the #6 ?
Cheers
I was going to order the Ecofan rated 185*-650*, #812 maxair, I believe. Which model do you have, and your opinion on how well it performs on the #6 ?
Cheers
- Merc300d
- Member
- Posts: 506
- Joined: Tue. Feb. 18, 2014 7:45 pm
- Location: Charleston SC
- Hand Fed Coal Stove: Glenwood 6 base heater
- Baseburners & Antiques: Too many
- Coal Size/Type: Nut
- Other Heating: Oil base board
Hello D Frost. I don't remember the exact specs as they have quite a few of them. I believe it was a mid grade model made by Alcona It reads model T805. I believe it starts to turn on around 200 degrees or so. Between the " ecofan" , a ceiling fan and a vertical fan to push the heat from behind the stove , it all does a grate job of heating my home. The stove is in the farthest room Of the house. Considering its location , I believe it does make a difference in pushing the heat around.
If the stove was centrally located , I probably wouldn't of felt the need to buy one. It depends on ones particular setup.
Kevin
If the stove was centrally located , I probably wouldn't of felt the need to buy one. It depends on ones particular setup.
Kevin
- Merc300d
- Member
- Posts: 506
- Joined: Tue. Feb. 18, 2014 7:45 pm
- Location: Charleston SC
- Hand Fed Coal Stove: Glenwood 6 base heater
- Baseburners & Antiques: Too many
- Coal Size/Type: Nut
- Other Heating: Oil base board
I actually bought it at a wood stove shop in Windham NH. They carry them it stock and it was priced at around 80 bucks. It was the only model they had. I didn't first realize your from NH. Not sure how close it is to you. I guess for a few more bucks to get the max air.
- D-frost
- Member
- Posts: 1186
- Joined: Sun. Dec. 08, 2013 7:10 am
- Location: Southern New Hampshire
- Hand Fed Coal Stove: Harman MK ll
- Hand Fed Coal Furnace: Yukon Eagle I (multi-fuel oil, wood/coal)
- Baseburners & Antiques: Herald 'fireside oak'
- Coal Size/Type: nut/stove-Blaschak/Lehigh
Thanks Merc,
I'm next town over(10 miles away). I'll visit them tomorrow.
Cheers
I'm next town over(10 miles away). I'll visit them tomorrow.
Cheers
- Merc300d
- Member
- Posts: 506
- Joined: Tue. Feb. 18, 2014 7:45 pm
- Location: Charleston SC
- Hand Fed Coal Stove: Glenwood 6 base heater
- Baseburners & Antiques: Too many
- Coal Size/Type: Nut
- Other Heating: Oil base board
Nice. It was right off 93. About a mile on the right in a plaza. I can remember the name. Nice place and nice people.
- D-frost
- Member
- Posts: 1186
- Joined: Sun. Dec. 08, 2013 7:10 am
- Location: Southern New Hampshire
- Hand Fed Coal Stove: Harman MK ll
- Hand Fed Coal Furnace: Yukon Eagle I (multi-fuel oil, wood/coal)
- Baseburners & Antiques: Herald 'fireside oak'
- Coal Size/Type: nut/stove-Blaschak/Lehigh
MB300d,
Went to 'The Stove Shoppe' in Windham this morning, and purchased the Ecofan Airmax(175cfm). The way the wind is blowing here today, if we lose electric, now I have a fan. Thank you, Merc300d, for reminding me that they was close.
Cheers
Went to 'The Stove Shoppe' in Windham this morning, and purchased the Ecofan Airmax(175cfm). The way the wind is blowing here today, if we lose electric, now I have a fan. Thank you, Merc300d, for reminding me that they was close.
Cheers