Fame Rosemont Information

Pauliewog · Post by **Pauliewog** » Tue. Feb. 17, 2015 10:31 am

Photog200 wrote:
No, I don't have that book, is it a complete book or just those two pages?

Randy

Randy

The price list is complete and online. I will post the link on your Geneva Oak thread. It will be easier for others to find in the future.

Paulie

nortcan · Post by **nortcan** » Tue. Feb. 17, 2015 12:16 pm

Hi Greg, what happens with your square Keystone ll stove? Did you have time to restore it and burn some anthr in it?
Salutations.

Pauliewog · Post by **Pauliewog** » Mon. Mar. 02, 2015 2:31 am

OK , I'm waiting for the finial, top trim ring, base, and front foot rest to come back from the plating shop so I wanted to post a progress update.

The stove is all disassembled and I'm working on rust removal and refinishing all the pieces. My original plan was to soak and buff out the top front nickel badge and the side footrests . I wasn't satisfied with the number of bare spots so I think I'm going to strip them and have them replated also.

Paulie8

Pauliewog · Post by **Pauliewog** » Mon. Mar. 02, 2015 2:44 am

A few more pics.

Paulie

Pauliewog · Post by **Pauliewog** » Mon. Mar. 02, 2015 2:51 am

And a couple more of the grates.

Paulie

SWPaDon · Post by **SWPaDon** » Mon. Mar. 02, 2015 6:23 am

That's going be a real pretty stove when it's done.

Sunny Boy · Post by **Sunny Boy** » Mon. Mar. 02, 2015 6:39 am

SWPaDon wrote:That's going be a real pretty stove when it's done.

Amen to that !

Paul

Pauliewog · Post by **Pauliewog** » Tue. Mar. 03, 2015 12:40 am

Sunny Boy wrote:
SWPaDon wrote:That's going be a real pretty stove when it's done.
Amen to that !

Paul

Thanks guys, I like the three sided mica on this little stove.

I had to drill out two screws , other than that everything is going nice. It looks like I'll be done with this one long before the nickel comes back from the plating shop.

Paulie

Pauliewog · Post by **Pauliewog** » Mon. Mar. 23, 2015 11:42 pm

I should have my trim back from the plating shop next week.

Everything else is cleaned up and finished with two coats of stove polish, and ready for reassembly.

I finished casting a new refractory liner over the weekend and will give it a slow primary cure in the powder coat oven.before I finish the cure in the Alaska ash pan.

Paulie

SWPaDon · Post by **SWPaDon** » Tue. Mar. 24, 2015 6:51 am

Nice job on that liner.

Pauliewog · Post by **Pauliewog** » Tue. Mar. 24, 2015 6:43 pm

SWPaDon wrote:Nice job on that liner.

Thanks Don,

My bride wasn't real happy with me cutting of the bottom of her flower pot for a casting template.

I guess I have to cast a new bottom in the flower pot now

Paulie

nortcan · Post by **nortcan** » Tue. Mar. 24, 2015 9:43 pm

Very nice job, hope to see the rest soon and maybe a fire in it?

Pauliewog · Post by **Pauliewog** » Tue. Mar. 24, 2015 10:33 pm

nortcan wrote:Very nice job, hope to see the rest soon and maybe a fire in it?

Thanks Nortcan, The mica was shipped today, and is due to arrive Saturday.. As soon as I get the nickel trim back .................... ........................
"There Will Be Pictures Of The Fire ! "

Meanwhile, I'm sealing it up ang putting it back together.

Paulie

Post by **franco b** » Tue. Mar. 24, 2015 10:45 pm

Nice. I can see and feel you are absorbed in this thing and enjoying it. Like you I could just sit and look at it for hours. One bit at a time.

Pauliewog · Post by **Pauliewog** » Sat. Apr. 04, 2015 11:42 pm

franco b wrote:Nice. I can see and feel you are absorbed in this thing and enjoying it. Like you I could just sit and look at it for hours. One bit at a time.

Waiting for the Nickel leaves a lot of time for admiration. And yes, I an enjoying this one.
I decided last minute to have the hinge pins replated, so I put brass bolts in temporary in order to fit the doors.

At this rate I think I will have more money spent on Coors Light than on the plating! Meanwhile I'm stripping down and working on the Royal Stewart 155.

The plating for the Dickson Oak isn't due back till the end of May , so that one is on the back burner.

Paulie

Fame Rosemont Information

Attachments

Attachments

Attachments

Attachments

Attachments

Attachments

Attachments