Koker Blower

cledusdtrucker · Post by **cledusdtrucker** » Sun. Aug. 23, 2015 4:10 pm

is there any way to clean and lube the big blower motor? it started to squeak a little last season

WNYRob · Post by **WNYRob** » Tue. Aug. 25, 2015 1:20 pm

If it is the same as mine, it is a sealed unit so you will not be able to oil it (unless there is a way to rip it apart and do it that way). The smaller Fasco combustion fan that came with mine was serviceable, with two oil ports to drip oil into.

cledusdtrucker · Post by **cledusdtrucker** » Sat. Sep. 05, 2015 2:49 pm

Ok so I took the motor apart and one bearing is on its way out. now does anyone know were to find a TPI 620022 bearing I am having a hard time trying to locate one!

nepacoal · Post by **nepacoal** » Sat. Sep. 05, 2015 7:04 pm

I think it is a 6202Z bearing. Amazon has dozens of suppliers...

Post by **StokerDon** » Sat. Sep. 05, 2015 7:15 pm

cledusdtrucker wrote:Ok so I took the motor apart and one bearing is on its way out. now does anyone know were to find a TPI 620022 bearing I am having a hard time trying to locate one!

Wow, nice job there guys!

Cledusdtrucker, for actually taking it apart, trying to fix it AND showing it to us.

Nepacoal, for finding that pesky "Z" that looked like a "2".

If that is the fix, please post your results in this thread so other Koker owners can find it.

-Don

plumberman · Post by **plumberman** » Sun. Sep. 06, 2015 5:13 am

grainger/zoro has them

Post by **coaledsweat** » Sun. Sep. 06, 2015 9:34 am

The yellow pages, a bearing supply house.

cledusdtrucker · Post by **cledusdtrucker** » Mon. Sep. 07, 2015 9:31 am

http://www.amazon.com/gp/product/B0094DVTXQ?psc=1 ... AZDOWP300U
i will be ordering these and will post up some pic later

cledusdtrucker · Post by **cledusdtrucker** » Mon. Sep. 07, 2015 2:20 pm

so I took the feed motor apart and everything looks good now what should I use on the electric motor to clean it

2001Sierra · Post by **2001Sierra** » Mon. Sep. 07, 2015 4:39 pm

Check your PM's. I hope I can help on a local level.

cledusdtrucker · Post by **cledusdtrucker** » Fri. Sep. 18, 2015 10:42 pm

So I got bearings for 4.50 shipped to the door and I have installed them they work good so far will find out in the winter

McGiever · Post by **McGiever** » Sat. Sep. 19, 2015 8:21 am

cledusdtrucker wrote:so I took the feed motor apart and everything looks good now what should I use on the electric motor to clean it

What did you find to clean that motor?
Hope you cleaned it before replacing the bearings. Cleaner can remove new lubrication same as old.

cledusdtrucker · Post by **cledusdtrucker** » Sun. Sep. 20, 2015 2:35 pm

the only thing I cleaned with the spray was the feed motors electric parts I removed the bearing from it before I sprayed it
now when I went to install the new combustion blower the oil holes were on the bottom so I clocked the housing 180 and the electric connections hit so I am thinking the way they have it from the factory is wrong can anyone send pics of the way theirs are hook up please

Koker Blower

Attachments

Attachments

Attachments