Where Are They in Pa.?

Forum rules
ATTN Coal Dealers: To advertise your company you're allowed to start one new topic in "Coal Prices, Coal Quality, Coal Dealer Inquiries and Reviews". You may also respond to other topics started by others where your company has been mentioned and are encouraged to do so. Any other posts just for advertising here or anywhere else on nepacrossroads.com will be considered spam and removed. Repeated violations will result in a permanent ban.

Where are they in Pa.?

PostBy: deepwoods On: Fri Sep 11, 2015 4:20 pm

I see owners of antique stoves getting vital parts made such as grates, barrels, backpipes made in various states but have yet to see a Pa. source for foundry or sheetmetal reproductions. Anyone care to comment? Would think there has to be someone doing this work in Pa.
deepwoods
 
Hand Fed Coal Stove: Hitzer 50-93 & DS Machine Newstyle Champion
Coal Size/Type: nut (so far)
Other Heating: Ruud propane forced air system

Visit Lehigh Anthracite

Re: Where are they in Pa.?

PostBy: BunkerdCaddis On: Fri Sep 11, 2015 9:51 pm

deepwoods wrote:Would think there has to be someone doing this work in Pa.


I have no experience with any foundry outfit as of yet but came across a number for one posted at a local coal dealer. It's Cattail Foundry located in Gordenville PA (717) 661-9172. If you google them it's mostly antique engines and machinery forums that talk about them. It's an Amish operation so a phone call is "let a messg, will call when it's our turn to use the phone" deal. They seem to have a high reputation.

There are some backdoor foundries in the Columbia/ Marietta area but as yet I haven't had a need to go door knocking to get something done.

Of course one can never have too many...hobbies either.
BunkerdCaddis
 
Hand Fed Coal Boiler: New Yorker WC-90 or more likely a Van Wert VW85H [to be installed (soon, very soon)(well not as soon as I had anticipated]
Hand Fed Coal Stove: Waterford 105 pulling duty, Saey Hanover II getting dressed for the party
Coal Size/Type: pea/nut
Other Heating: oil fired hydronic

Re: Where are they in Pa.?

PostBy: deepwoods On: Sat Sep 12, 2015 11:53 am

BC, I also have not needed foundry/sheetmetal service yet. My search for a fixable centenarian stove will eventually produce results and would like to be aware of any folks in my state who are qualified to do that sort of work. Not that I insist on Pa. but it would be another arrow in my quiver so to speak :) Foundry you mentioned could be a spin-off from DS Machine? Going to file that phone# for future reference. Thanks :D
Dick
deepwoods
 
Hand Fed Coal Stove: Hitzer 50-93 & DS Machine Newstyle Champion
Coal Size/Type: nut (so far)
Other Heating: Ruud propane forced air system

Re: Where are they in Pa.?

PostBy: deepwoods On: Mon Sep 14, 2015 11:41 am

I copied this from post birman07 listed on his March-Brownback rebuild. Another source for sheetmetal work.

Picked up the both barrels sheet metal sections yesterday from the shop I found in Shamokin Pa. They did a good job on replicating what I took them. They even went an extra step and put a roll in them for me. :D A little bit of cleaning and fitting on the top of the pot area and I'll be able to dry fit them. Then it's find the appropriate nuts and bolts and get ready to reassemble
deepwoods
 
Hand Fed Coal Stove: Hitzer 50-93 & DS Machine Newstyle Champion
Coal Size/Type: nut (so far)
Other Heating: Ruud propane forced air system

Re: Where are they in Pa.?

PostBy: Alvin On: Mon Feb 06, 2017 11:34 am

Williamsport Foundy Company Google it
Alvin
 

Re: Where are they in Pa.?

PostBy: Pauliewog On: Mon Feb 06, 2017 8:33 pm

Sadly, the Williamsport Foundry closed its doors last month. I had some brass parts cast a few months ago at Zawol Brass Foundry in Wilkes Barre. Haven't had any luck finding any cast iron foundry in Northeast Pa. that is willing to take on small jobs.

Paulie
Pauliewog
 
Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
Hand Fed Coal Stove: Pittston Stove
Baseburners & Antiques: Fame Rosemont #20, Dickson Oak, Golden Oak, Happy Thought Oak, 1913 Herald Oak#16, (2)Comfort Stove
Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite


Re: Where are they in Pa.?

PostBy: Alvin On: Tue Feb 07, 2017 3:59 pm

Thats really unfortunate I was actually going to get them to make me some grates for my Jensen 30A I am not paying 141.00 plus shipping for each grate. I actually made some out of 1/2 inch steel that worked out OK. I just have to work on them a little to make them better I guess.
Alvin
 

Visit Lehigh Anthracite

Re: Where are they in Pa.?

PostBy: McGiever On: Wed Feb 08, 2017 11:02 am

Alvin wrote:Thats really unfortunate I was actually going to get them to make me some grates for my Jensen 30A I am not paying 141.00 plus shipping for each grate. I actually made some out of 1/2 inch steel that worked out OK. I just have to work on them a little to make them better I guess.


For the DYI'r, rebar [reinforcing bar used in concrete] is a harder steel than other goods.
And can be welded too. :)
McGiever
 
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Coal Size/Type: PEA / ANTHRACITE
Other Heating: Ground Source Heat Pump
Stove/Furnace Make: Hydro Heat /Mega Tek

Re: Where are they in Pa.?

PostBy: Alvin On: Wed Feb 08, 2017 8:53 pm

I did notice rebar is harder and it don't bend well I broke it woknder how well it would hold up as a coal grate
Alvin