Can't Light Keystoker

Post Reply
 
jethro
New Member
Posts: 4
Joined: Sun. Dec. 21, 2014 10:31 am
Hot Air Coal Stoker Furnace: keystoker
Hot Air Coal Stoker Stove: hyfire II
Coal Size/Type: rice

Post by jethro » Thu. Oct. 29, 2015 8:37 pm

I have a Keystoker hot air furnance everything was going good change to kimmel rice coal and fire went out and now I can't get the thing lit.I have been burning a stoker for 4 years now.took all the coal out push plate (auger)working as it should.I took the combustion fan off ,very little ask in there . Put a light in the fire box all holes in the shoe look clean. Put the combustion fan back on started it up and getting plenty of air through the shoe. The only thing I can think of is bad coal. I bought it at tractor supply in the beginning of the month. Any help or suggestions with this problem would be appreciated. thanks

 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Thu. Oct. 29, 2015 9:44 pm

Try a different bag and see if the results are the same???

 
User avatar
windyhill4.2
Member
Posts: 6072
Joined: Fri. Nov. 22, 2013 2:17 pm
Location: Jonestown,Pa.17038
Stoker Coal Boiler: 1960 EFM520 installed in truck box
Hand Fed Coal Stove: Crane 404 with variable blower
Coal Size/Type: 404-nut, 520 rice ,anthracite for both

Post by windyhill4.2 » Thu. Oct. 29, 2015 9:53 pm

That sure is different than most Kimmel coal users report.... most speak highly of how easy it is to get the fire hot quick with Kimmels coal. Since you have been using a stoker for 4 yrs already, I guess it won't help to tell you that the fan blowing air thru coal won't lite it :shock: you have to have some fire too toothy


 
User avatar
2001Sierra
Member
Posts: 2211
Joined: Wed. May. 20, 2009 8:09 am
Location: Wynantskill NY, 10 miles from Albany
Hot Air Coal Stoker Stove: Keystoker 90 Chimney vent
Coal Size/Type: Rice
Other Heating: Buderus Oil Boiler 3115-34

Post by 2001Sierra » Thu. Oct. 29, 2015 9:58 pm

I now use a 4 inch diameter cardboard tube, 4 inches tall. I cut a 1 inch air hole in the base edge for lighting. 1 sheet of newspaper, cowboy charcoal, and coal. Light it with a torch, turn on combustion fan and you are burning. Be sure to have coal on the backside of the cardboard tube and around the tube over the air holes and you are burning.

 
User avatar
gaw
Member
Posts: 4461
Joined: Fri. Jan. 26, 2007 2:51 am
Location: Parts Unknown
Stoker Coal Boiler: Keystoker KA-6
Coal Size/Type: Rice from Schuylkill County

Post by gaw » Thu. Oct. 29, 2015 11:29 pm

Does the coal look like it should or just a little different. You can get bad coal and you would not be the first person I know to have gotten bad coal from Kimmel. Does it try to burn? As suggested try a different bag or even a different brand and see what happens.

 
jethro
New Member
Posts: 4
Joined: Sun. Dec. 21, 2014 10:31 am
Hot Air Coal Stoker Furnace: keystoker
Hot Air Coal Stoker Stove: hyfire II
Coal Size/Type: rice

Post by jethro » Sat. Oct. 31, 2015 10:29 pm

Thanks for all the replies . I cleaned all the coal out of the hopper and the shoe put in a new bag in and it lit like it always has. I hope that was all the bad stuff in that ton. thanks again for the suggestions. :D

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”