Newbie to Coal
-
- Member
- Posts: 288
- Joined: Sat. Dec. 05, 2015 7:00 am
- Location: Townsend Delaware
- Hand Fed Coal Stove: DS 160
Oldsch I like your logic. It seems to me you can have fan forced air chimney but if the stove alows no air into it I don't think the fan will do much. On the other hand if there is to much air coming in with a strong draft then it can over fire or waste fuel. The bimetal damper on the DS certainly controls the fire well in my opinion . I am going to check my stove anyhow and see what my numbers are. If for nothing else to satisfy my mind. One thing I'm worried about is co. Since coal is new to me I wonder how dangerous it is. I think I'm going to add a 2nd co detector in basement just to make me feel better.
- SWPaDon
- Member
- Posts: 9857
- Joined: Sun. Nov. 24, 2013 12:05 pm
- Location: Southwest Pa.
- Hand Fed Coal Furnace: Clayton 1600M
- Coal Size/Type: Bituminous
- Other Heating: Oil furnace
Co is colorless, odorless, tasteless and deadly. You should have co detectors on every level of the home.Waswood wrote:Oldsch I like your logic. It seems to me you can have fan forced air chimney but if the stove alows no air into it I don't think the fan will do much. On the other hand if there is to much air coming in with a strong draft then it can over fire or waste fuel. The bimetal damper on the DS certainly controls the fire well in my opinion . I am going to check my stove anyhow and see what my numbers are. If for nothing else to satisfy my mind. One thing I'm worried about is co. Since coal is new to me I wonder how dangerous it is. I think I'm going to add a 2nd co detector in basement just to make me feel better.
Read more : http://www.ehow.com/facts_7191402_correct-height- ... ctor_.htmlA carbon monoxide detector recognizes carbon monoxide, a colorless, odorless, tasteless and highly toxic gas. The correct height for a carbon monoxide detector is knee height on the wall. This offers protection while sleeping, which is when you are most vulnerable to carbon monoxide poisoning. Detectors should also be hung above permanently installed fuel-burning appliances
-
- Member
- Posts: 288
- Joined: Sat. Dec. 05, 2015 7:00 am
- Location: Townsend Delaware
- Hand Fed Coal Stove: DS 160
Swpadon thanks. I have a co detector on each floor along with smoke detectors throughly the house. I will install extra co detectors for peace of mind. All mine are currently on the ceiling as co/ smoke combos but after reading the link I will wall mount the new ones.
I suggest investing in a co monitor with a numeric display rather than just a co alarm. I think it is useful to see the number start to show up before the alarm point is reached. It will also save a peak value in case you miss seeing it on the display at the moment it occurred. I check the peak value on mine daily to make sure it is still 0.
- Lightning
- Site Moderator
- Posts: 14669
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
I use those also.
Very handy!
I have the Kiddie Night Hawk model, two of them. I think they where $35 each at Home De Pot. They use batteries only.
Very handy!
I have the Kiddie Night Hawk model, two of them. I think they where $35 each at Home De Pot. They use batteries only.
- windyhill4.2
- Member
- Posts: 6072
- Joined: Fri. Nov. 22, 2013 2:17 pm
- Location: Jonestown,Pa.17038
- Stoker Coal Boiler: 1960 EFM520 installed in truck box
- Hand Fed Coal Stove: Crane 404 with variable blower
- Coal Size/Type: 404-nut, 520 rice ,anthracite for both
Co is colorless, odorless, tasteless and deadly. You should have co detectors on every level of the home.SWPaDon wrote:
Read more : http://www.ehow.com/facts_7191402_correct-height- ... ctor_.html[/quote]A carbon monoxide detector recognizes carbon monoxide, a colorless, odorless, tasteless and highly toxic gas. The correct height for a carbon monoxide detector is knee height on the wall. This offers protection while sleeping, which is when you are most vulnerable to carbon monoxide poisoning. Detectors should also be hung above permanently installed fuel-burning appliances
This is an issue that has baffled me since getting the CO detectors... the instructions advise putting them high on the wall,i always thought that CO collected from the floor & built it's way upward,time for me to move all my CO detectors as I followed the instructions instead of common sense.SWPaDon,THANKS much for posting that informative link ,i need to learn to goggle more things instead of following some paper print that seems opposite my thinking.
- SWPaDon
- Member
- Posts: 9857
- Joined: Sun. Nov. 24, 2013 12:05 pm
- Location: Southwest Pa.
- Hand Fed Coal Furnace: Clayton 1600M
- Coal Size/Type: Bituminous
- Other Heating: Oil furnace
You are welcome Sir.windyhill4.2 wrote: Read more : http://www.ehow.com/facts_7191402_correct-height- ... ctor_.html
This is an issue that has baffled me since getting the CO detectors... the instructions advise putting them high on the wall,i always thought that CO collected from the floor & built it's way upward,time for me to move all my CO detectors as I followed the instructions instead of common sense.SWPaDon,THANKS much for posting that informative link ,i need to learn to goggle more things instead of following some paper print that seems opposite my thinking.