Do Your Stoves "Sing" to You?

Post Reply
 
jubileejerry
Member
Posts: 304
Joined: Sun. Nov. 17, 2013 5:29 pm
Location: Northeast Nebraska
Baseburners & Antiques: Wehrle Acme Sunburst 112, Hot Blast wood/coal burner

Post by jubileejerry » Tue. Dec. 15, 2015 11:45 pm

I'm a rookie coal burner, long-time wood-burner, and so far I'm glad I switched. I'm having a lot of fun learning to use the two stoves I'm using, the Wehrle baseburner and the Warm Morning Locke 120. I have a mpd on the Locke and a baro plus a mpd on the Wehrle. We haven't had very cold weather here yet, with only a couple of days down around 9-15deg. F. It's mostly been in the low thirties at night. I'm using Blaschak nut in the Wehrle and Kimmels nut in the Locke. I can't say I can see a very big difference in them but maybe with more experience I will. I think later I might swap them and see if I can notice any differences then. They both have similar amounts of ashes and seem to be almost the same color, slightly reddish. I've fished out large pieces of wood from both kinds (4-5" long X 1" square). I've been able to maintain fires for long periods without problems. I only lost the fires two times due to not loading in time. I just goofed up by shaking it too much and I think too much cold air hit the coals. Anyway, what I have noticed is when the manometer shows the right draft, and the coals are nice and red with the soft blue flames dancing, both stoves have a very pleasant sound as the air enters the intake openings. The Locke also has a suction sound through the top lid sliding regulator and the Wehrle has the same kind of sound around the valve of the mpd. It's like the stoves are singing to me when they're working right. That might sound kind of corny but I really like that. I think once I get used to that and have more experience as the colder days pass, I will be able to adjust them without the manometer. In my mind I imagine someone back in the 1800's and early 1900's who knew his stove well enough to know how to adjust it by listening to it. What do you guys think?

 
KingCoal
Member
Posts: 4837
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 1 comforter stove works all iron coal box stove, seventies.
Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6, GW 113 formerly Sir Williams, maybe others at Pauliewog’s I’ve forgotten about
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Wed. Dec. 16, 2015 6:00 am

jubileejerry wrote:I'm a rookie coal burner, long-time wood-burner, and so far I'm glad I switched. I'm having a lot of fun learning to use the two stoves I'm using, the Wehrle baseburner and the Warm Morning Locke 120. I have a mpd on the Locke and a baro plus a mpd on the Wehrle. We haven't had very cold weather here yet, with only a couple of days down around 9-15deg. F. It's mostly been in the low thirties at night. I'm using Blaschak nut in the Wehrle and Kimmels nut in the Locke. I can't say I can see a very big difference in them but maybe with more experience I will. I think later I might swap them and see if I can notice any differences then. They both have similar amounts of ashes and seem to be almost the same color, slightly reddish. I've fished out large pieces of wood from both kinds (4-5" long X 1" square). I've been able to maintain fires for long periods without problems. I only lost the fires two times due to not loading in time. I just goofed up by shaking it too much and I think too much cold air hit the coals. Anyway, what I have noticed is when the manometer shows the right draft, and the coals are nice and red with the soft blue flames dancing, both stoves have a very pleasant sound as the air enters the intake openings. The Locke also has a suction sound through the top lid sliding regulator and the Wehrle has the same kind of sound around the valve of the mpd. It's like the stoves are singing to me when they're working right. That might sound kind of corny but I really like that. I think once I get used to that and have more experience as the colder days pass, I will be able to adjust them without the manometer. In my mind I imagine someone back in the 1800's and early 1900's who knew his stove well enough to know how to adjust it by listening to it. What do you guys think?
i think you're not only an expert restorer but a very savvy operator too. it's all about the details and you have that down pat. :)

i'm kind of surprised that you guys have had that kind of cold already, we've had 28* overnight a few times but nothing lower than that yet, could change the next 3 days, though they say it will be back up in the mid fifties again next week.

happy heating,
steve

 
User avatar
SWPaDon
Member
Posts: 9857
Joined: Sun. Nov. 24, 2013 12:05 pm
Location: Southwest Pa.
Hand Fed Coal Furnace: Clayton 1600M
Coal Size/Type: Bituminous
Other Heating: Oil furnace

Post by SWPaDon » Wed. Dec. 16, 2015 6:40 am

I agree with Steve, you have noticed one of the key things necessary to operate a coal stove or furnace. I 'listen' to my furnace every time I tend or check it. I do not use a manometer, and I use a MPD. Her whispers will tell me what she needs each time.

 
User avatar
freetown fred
Member
Posts: 30293
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Wed. Dec. 16, 2015 6:42 am

Nice JJ, YES, I can tell a lot just listening to the old HITZER! :)


 
User avatar
Lightning
Site Moderator
Posts: 14658
Joined: Wed. Nov. 16, 2011 9:51 am
Location: Olean, NY
Stoker Coal Boiler: Modified AA 130
Coal Size/Type: Pea Size - Anthracite

Post by Lightning » Wed. Dec. 16, 2015 6:52 am

Not only do they sing, they keep rhythm with a little snap, crackle and pop! :)

 
waldo lemieux
Member
Posts: 2270
Joined: Sun. Sep. 30, 2012 8:20 pm
Location: Ithaca,NY

Post by waldo lemieux » Wed. Dec. 16, 2015 6:53 am

An accomplished "Stove Whisperer" is what Id offer>>> :notworthy: all you hand fired guys :)

 
KingCoal
Member
Posts: 4837
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 1 comforter stove works all iron coal box stove, seventies.
Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6, GW 113 formerly Sir Williams, maybe others at Pauliewog’s I’ve forgotten about
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Wed. Dec. 16, 2015 7:19 am

waldo lemieux wrote:An accomplished "Stove Whisperer" is what Id offer>>> :notworthy: all you hand fired guys :)
"Stove Whisperer" :D that's VERY good, wish i'd thought of it.

 
User avatar
Canaan coal man
Member
Posts: 822
Joined: Thu. Nov. 08, 2012 12:37 pm
Location: East Canaan, CT
Stoker Coal Boiler: Efm 520
Hand Fed Coal Stove: A little cubby coal stove in the basement
Baseburners & Antiques: Glenwood #6
Coal Size/Type: Stove And Nut

Post by Canaan coal man » Wed. Dec. 16, 2015 9:30 am

While my G6 dose not sing, The wife however complains that I talk and worrie more about the stove than her, I hear that loud and clear. :x


 
User avatar
Sunny Boy
Member
Posts: 25547
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Wed. Dec. 16, 2015 9:38 am

My range doesn't sing, it just hums along,..... it hasn't learned the words yet. :D

Paul

 
User avatar
michaelanthony
Member
Posts: 4550
Joined: Sat. Nov. 22, 2008 10:42 pm
Location: millinocket,me.
Hand Fed Coal Stove: Vigilant 2310, gold marc box stove
Hand Fed Coal Furnace: Gold Marc Independence
Baseburners & Antiques: Home Sparkle 12
Coal Size/Type: 'nut
Other Heating: Fujitsu mini split, FHA oil furnace

Post by michaelanthony » Wed. Dec. 16, 2015 10:21 am

Canaan coal man wrote:While my G6 dose not sing, The wife however complains that I talk and worrie more about the stove than her, I hear that loud and clear. :x
Haha, they're all sisters! My wife say's the same thing. :mad:

 
coalfan
Member
Posts: 1829
Joined: Tue. Mar. 12, 2013 3:00 pm
Location: NW ohio
Hand Fed Coal Stove: ds circultor1500 \chubby coal stove
Coal Size/Type: nut/ pea ant.some bit.
Other Heating: kerosene\cold nat. gas

Post by coalfan » Wed. Dec. 16, 2015 10:38 am

dont yah love it guys :) . my hitzer 354 and my old hearthglow brunco I could tell just by the draft /sound minus the windows what she . they were doing !!!! and yah the lady of the house complained ,what are you doing ,what is it with that stove ,etc. :shock: really arent you warm I asked well that only got me so far .! :mad:

 
User avatar
Lightning
Site Moderator
Posts: 14658
Joined: Wed. Nov. 16, 2011 9:51 am
Location: Olean, NY
Stoker Coal Boiler: Modified AA 130
Coal Size/Type: Pea Size - Anthracite

Post by Lightning » Wed. Dec. 16, 2015 12:26 pm

I remind her that there could be worse things to be obsessive with :lol:

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”