Caframo Stove Fans
-
- Member
- Posts: 4197
- Joined: Wed. Oct. 03, 2012 9:53 am
- Location: Western Massachusetts
- Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
- Coal Size/Type: Stove / Anthracite.
- Other Heating: Oil fired, forced hot air.
Ok, I guess this is as good a section as any to post this question. I have used the search but found nothing...
Has anyone used a Caframo fan on top of their stove?
Any good?
Do they make a difference?
How long do the motors last?
Was it worth the $100+ ?
I'm tossing around the idea of using one on top of my Crawford.
Has anyone used a Caframo fan on top of their stove?
Any good?
Do they make a difference?
How long do the motors last?
Was it worth the $100+ ?
I'm tossing around the idea of using one on top of my Crawford.
Attachments
-
- Member
- Posts: 4197
- Joined: Wed. Oct. 03, 2012 9:53 am
- Location: Western Massachusetts
- Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
- Coal Size/Type: Stove / Anthracite.
- Other Heating: Oil fired, forced hot air.
I just spit out my Cavatelli!tcalo wrote:As the finial...scalabro wrote:I'm tossing around the idea of using one on top of my Crawford.
Come to think of it.....if it was nickel plated.....
- dcrane
- Verified Business Rep.
- Posts: 3128
- Joined: Sun. Apr. 22, 2012 9:28 am
- Location: Easton, Ma.
- Hand Fed Coal Stove: Crane 404
Blahhhhhhh hahahaha... there goes my milk through the nostrilstcalo wrote:As the finial...scalabro wrote:I'm tossing around the idea of using one on top of my Crawford.
My opinion is this... in all seriousness, if I had a restored Crawford I wouldn't let that frigging thing within 10 feet of my stove
we know this much... the rings on that stove are not just for pretty looks (ohhh no... our for fathers were wiser than that)... they are to do exactly what you want that fan to do!
heat rises....hits those rings and filters outward into the room (slow but surely its happening!!!)... if you must, put that silly fan way over there>>>>>> away from the masterpiece.
- oliver power
- Member
- Posts: 2970
- Joined: Sun. Apr. 16, 2006 9:28 am
- Location: Near Dansville, NY
- Stoker Coal Boiler: KEYSTOKER Kaa-2
- Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254
I thought of trying one on my new D.S. Circulator stove if needed. However, it's not needed......... EDIT: I have seen different ones running. They are dead silent. I may try one yet. Maybe I can speed the circulation up after having the overhead door open. The circulator stove does such a nice job of circulating, I kind of forgot about those fans. But, if I can speed the circulation...........
Last edited by oliver power on Thu. Dec. 31, 2015 6:17 am, edited 1 time in total.
- Photog200
- Member
- Posts: 2063
- Joined: Tue. Feb. 05, 2013 7:11 pm
- Location: Fulton, NY
- Baseburners & Antiques: Colonial Clarion cook stove, Kineo #15 base burner & 2 Geneva Oak Andes #517's
- Coal Size/Type: Blaschak Chestnut
- Other Heating: Electric Baseboard
I bought one for the cook range last year. It has been working well for me. You don't realize how much ait it moves around until you go to put cayenne pepper on something and it blows it back in your face.
Randy
Randy
I can get them on Ebay for 60-$110 for the original eco fan. You have been pleased with your fan? The ad says it's silent. How silent is silent in this case?Photog200 wrote:I bought one for the cook range last year. It has been working well for me. You don't realize how much ait it moves around until you go to put cayenne pepper on something and it blows it back in your face.
Randy
-
- Member
- Posts: 46
- Joined: Wed. Oct. 21, 2015 12:25 pm
- Location: Frederick MD
- Hand Fed Coal Stove: DS1600
- Coal Size/Type: Nut Anthracite
- Other Heating: Geothermal
I have the largest one. It is silent. It does not spin fast enough to make noise. Don't expect to sit in front of the stove and feel a breeze. I like it and it is a cool conversation piece. Get one if the money it it is meant for entertainment but if you expect it to blow heat across the room like a regular 120 volt fan you will be disappointed.
- D-frost
- Member
- Posts: 1186
- Joined: Sun. Dec. 08, 2013 7:10 am
- Location: Southern New Hampshire
- Hand Fed Coal Stove: Harman MK ll
- Hand Fed Coal Furnace: Yukon Eagle I (multi-fuel oil, wood/coal)
- Baseburners & Antiques: Herald 'fireside oak'
- Coal Size/Type: nut/stove-Blaschak/Lehigh
I purchased one last year, planning to use for power outages. I've been using it on the Herald this season(mostly with a wood fire), and it works very well with this open floor plan. No noise, a little on the pricey side, but it works. Made in Canada, Ecofan model# 812CA-BK.
Cheers
Cheers
-
- Member
- Posts: 4197
- Joined: Wed. Oct. 03, 2012 9:53 am
- Location: Western Massachusetts
- Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
- Coal Size/Type: Stove / Anthracite.
- Other Heating: Oil fired, forced hot air.
Thanks for the information gentlemen
As some of you may know, I've been running the Crawford with its dome off as it seems to throw more heat this way. I figure that this fan can move some additional air around by putting it in/on the "oven" surface.
As some of you may know, I've been running the Crawford with its dome off as it seems to throw more heat this way. I figure that this fan can move some additional air around by putting it in/on the "oven" surface.
- Photog200
- Member
- Posts: 2063
- Joined: Tue. Feb. 05, 2013 7:11 pm
- Location: Fulton, NY
- Baseburners & Antiques: Colonial Clarion cook stove, Kineo #15 base burner & 2 Geneva Oak Andes #517's
- Coal Size/Type: Blaschak Chestnut
- Other Heating: Electric Baseboard
These fans do run silent and they do move some air but as mentioned, not nearly as much as a 120v one would. Scott, the only thing I would say about using it in the oven part of the stove. The instructions say to make sure that cool air can be brought in across the fins of the fan to cool off the motor. With my oven on the Kineo, it sits down into a recess so not sure how deep yours is but make sure the fins are above that. and put it to the back part of the stove to draw in cooler air from the back. The fans won't last long if you don't keep the motor cooled off.scalabro wrote:Thanks for the information gentlemen
As some of you may know, I've been running the Crawford with its dome off as it seems to throw more heat this way. I figure that this fan can move some additional air around by putting it in/on the "oven" surface.
Randy
Last edited by Photog200 on Thu. Dec. 31, 2015 1:17 pm, edited 1 time in total.
- Sunny Boy
- Member
- Posts: 25726
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
For what it's worth.
Used mine on my Range mantel shelf and it worked like Randy's,... minus the pepper. But, it got progressively slower over the course of just a couple of weeks and tougher to get it going. Finally wouldn't work at all, even when putting it on hotter parts of the back of the range where it could still get cool air.
I did a web search about problems with them and found out this is not an uncommon problem. After what I read, I decided I'm not going to throw more money at it to ship it back to Canada to be repaired.
Paul
Used mine on my Range mantel shelf and it worked like Randy's,... minus the pepper. But, it got progressively slower over the course of just a couple of weeks and tougher to get it going. Finally wouldn't work at all, even when putting it on hotter parts of the back of the range where it could still get cool air.
I did a web search about problems with them and found out this is not an uncommon problem. After what I read, I decided I'm not going to throw more money at it to ship it back to Canada to be repaired.
Paul
- joeq
- Member
- Posts: 5743
- Joined: Sat. Feb. 11, 2012 11:53 am
- Location: Northern CT
- Hand Fed Coal Stove: G111, Southard Robertson
How 'bout this. If you're looking for a "non-electrical" fan to push air, get a hampster and cage with a "squirrel cage" thing-a-ma- jigy", install a model air plane prop to the shaft of the squirrel cage, and "Bam!" instant non electric fan.
(alright, I'll shut up now).
(alright, I'll shut up now).
- Photog200
- Member
- Posts: 2063
- Joined: Tue. Feb. 05, 2013 7:11 pm
- Location: Fulton, NY
- Baseburners & Antiques: Colonial Clarion cook stove, Kineo #15 base burner & 2 Geneva Oak Andes #517's
- Coal Size/Type: Blaschak Chestnut
- Other Heating: Electric Baseboard
Are you already into the hooch Joe?joeq wrote:How 'bout this. If you're looking for a "non-electrical" fan to push air, get a hampster and cage with a "squirrel cage" thing-a-ma- jigy", install a model air plane prop to the shaft of the squirrel cage, and "Bam!" instant non electric fan.
(alright, I'll shut up now).
Randy
- Sunny Boy
- Member
- Posts: 25726
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
Tried it. It was nice and tender after about 45 minutes.joeq wrote:How 'bout this. If you're looking for a "non-electrical" fan to push air, get a hampster and cage with a "squirrel cage" thing-a-ma- jigy", install a model air plane prop to the shaft of the squirrel cage, and "Bam!" instant non electric fan.
(alright, I'll shut up now).
Paul