I Finally Have It Figured Out

 
User avatar
Rob R.
Site Moderator
Posts: 18004
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: Chubby Jr

Post by Rob R. » Mon. Feb. 01, 2016 5:13 am

It is never too late to add an outside entrance.

 
titleist1
Member
Posts: 5226
Joined: Wed. Nov. 14, 2007 4:06 pm

Post by titleist1 » Mon. Feb. 01, 2016 7:00 am

Having an outside entrance is very convenient. Original house did not have one and I had the same routine...through the kitchen and down the steps. When we built the addition 15 years ago with a full basement and a outside entrance it has been great, especially with the ash pan.

Not just for coal stuff, but its nice to come in from clearing snow through the bilco doors and lay out the clothes to dry around the stoker without tracking through the upstairs. It would not be too bad a project to put one in...3' door minimum! Because of basement depth matching up with what existed our doorway is a little shorter than standard and I had to trim a few inches off the door.

 
User avatar
SWPaDon
Member
Posts: 9857
Joined: Sun. Nov. 24, 2013 12:05 pm
Location: Southwest Pa.
Hand Fed Coal Furnace: Clayton 1600M
Coal Size/Type: Bituminous
Other Heating: Oil furnace

Post by SWPaDon » Mon. Feb. 01, 2016 7:14 am

pintoplumber, can you make room for the coal storage in your basement? That would make your life a lot easier from here on out.

 
KingCoal
Member
Posts: 4837
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 1 comforter stove works all iron coal box stove, seventies.
Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6, GW 113 formerly Sir Williams, maybe others at Pauliewog’s I’ve forgotten about
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Mon. Feb. 01, 2016 7:24 am

pintoplumber wrote:Last February when I got new grates, I bought nut in bags to try it out. This summer I bought 5 tons of stove, of course it has some smaller pieces mixed in with it. I think what I have is good. My problem was I was afraid to pile it full of coal. If I keep it almost level with the loading door that seems good. Dennis
if you had 9" of coal over those grates you'd have about 115#'s in there. how much is in there when you have it up to the door sill ??


 
User avatar
pintoplumber
Member
Posts: 374
Joined: Tue. Mar. 31, 2015 8:44 pm
Location: Lititz PA
Hand Fed Coal Boiler: Burnham number series 17
Other Heating: Oil, forced hot air. Rheem

Post by pintoplumber » Mon. Feb. 01, 2016 12:20 pm

SWPaDon wrote:pintoplumber, can you make room for the coal storage in your basement? That would make your life a lot easier from here on out.
Don, I have a bin just to the left of the boiler. I put 2.8 tons in it this summer, I believe it will hold 3 tons. Dennis

 
User avatar
pintoplumber
Member
Posts: 374
Joined: Tue. Mar. 31, 2015 8:44 pm
Location: Lititz PA
Hand Fed Coal Boiler: Burnham number series 17
Other Heating: Oil, forced hot air. Rheem

Post by pintoplumber » Mon. Feb. 01, 2016 12:23 pm

KingCoal wrote:
pintoplumber wrote:Last February when I got new grates, I bought nut in bags to try it out. This summer I bought 5 tons of stove, of course it has some smaller pieces mixed in with it. I think what I have is good. My problem was I was afraid to pile it full of coal. If I keep it almost level with the loading door that seems good. Dennis
if you had 9" of coal over those grates you'd have about 115#'s in there. how much is in there when you have it up to the door sill ??
I've never weighed the coal going in. I just shovel it in. Dennis

 
KingCoal
Member
Posts: 4837
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 1 comforter stove works all iron coal box stove, seventies.
Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6, GW 113 formerly Sir Williams, maybe others at Pauliewog’s I’ve forgotten about
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Mon. Feb. 01, 2016 1:58 pm

i can tell ya, how deep is it from the door sill to the grates ?

 
User avatar
pintoplumber
Member
Posts: 374
Joined: Tue. Mar. 31, 2015 8:44 pm
Location: Lititz PA
Hand Fed Coal Boiler: Burnham number series 17
Other Heating: Oil, forced hot air. Rheem

Post by pintoplumber » Mon. Feb. 01, 2016 7:35 pm

KingCoal wrote:i can tell ya, how deep is it from the door sill to the grates ?
It looks to be 9". Dennis


 
KingCoal
Member
Posts: 4837
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 1 comforter stove works all iron coal box stove, seventies.
Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6, GW 113 formerly Sir Williams, maybe others at Pauliewog’s I’ve forgotten about
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Mon. Feb. 01, 2016 8:22 pm

pintoplumber wrote:
KingCoal wrote:i can tell ya, how deep is it from the door sill to the grates ?
It looks to be 9". Dennis
that's what I thought, about 112-115 #'s clear full.

i had your stoves older but smaller brother, the Riteway #37. 12x24x 9" deep grate area.

hope you have plenty of space to heat cause that stove on coal will ROCK and be totally controllable both low and high.

steve

 
User avatar
pintoplumber
Member
Posts: 374
Joined: Tue. Mar. 31, 2015 8:44 pm
Location: Lititz PA
Hand Fed Coal Boiler: Burnham number series 17
Other Heating: Oil, forced hot air. Rheem

Post by pintoplumber » Mon. Feb. 01, 2016 9:16 pm

Thank's for the calculations Steve. Not including the basement, it's about 2300 sq ft. I put some cast iron baseboard in the family room in the basement, but never hooked it up. No need for additional heat in the basement. Dennis

 
User avatar
pintoplumber
Member
Posts: 374
Joined: Tue. Mar. 31, 2015 8:44 pm
Location: Lititz PA
Hand Fed Coal Boiler: Burnham number series 17
Other Heating: Oil, forced hot air. Rheem

Post by pintoplumber » Thu. Feb. 04, 2016 9:03 pm

Here's a picture from this afternoon. The boiler was at 170 degrees.

Attachments

image.jpeg
.JPEG | 89.8KB | image.jpeg

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”