Don't Follow Your Passion
- Sunny Boy
- Member
- Posts: 25724
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
Thanks Grump - good video. And he's right.
I kicked around for a few years at "dream" jobs I thought I was passionate about. Once I learned what those jobs were really like I found I wasn't really passionate about them. Then, 34 years ago, I was lead to a career by my abilities, only to find out that was my real passion.
Paul
I kicked around for a few years at "dream" jobs I thought I was passionate about. Once I learned what those jobs were really like I found I wasn't really passionate about them. Then, 34 years ago, I was lead to a career by my abilities, only to find out that was my real passion.
Paul
- jpete
- Member
- Posts: 10829
- Joined: Thu. Nov. 22, 2007 9:52 am
- Location: Warwick, RI
- Hand Fed Coal Stove: Harman Mk II
- Coal Size/Type: Stove, Nut, Pea
- Other Heating: Dino juice
My passion is staying home and having people mail me checks. So far, haven't been able to figure out how to make a living at it.
- CoalHeat
- Member
- Posts: 8862
- Joined: Sat. Feb. 10, 2007 9:48 pm
- Location: Stillwater, New Jersey
- Stoker Coal Boiler: 1959 EFM 350
- Hand Fed Coal Stove: Harman Magnafire Mark I
- Baseburners & Antiques: Sears Signal Oak 15 & Andes Kitchen Range
- Coal Size/Type: Rice and Chestnut
- Other Heating: Fisher Fireplace Insert
Excellent video, always liked him.
- lsayre
- Member
- Posts: 21781
- Joined: Wed. Nov. 23, 2005 9:17 pm
- Location: Ohio
- Stoker Coal Boiler: AHS S130 Coal Gun
- Coal Size/Type: Lehigh Anthracite Pea
- Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75
Plenty of others have though!jpete wrote:My passion is staying home and having people mail me checks. So far, haven't been able to figure out how to make a living at it.
-
- Site Moderator
- Posts: 11417
- Joined: Wed. Nov. 05, 2008 5:11 pm
- Location: Kent CT
- Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
- Baseburners & Antiques: Glenwood Modern Oak 114
- Coal Size/Type: nut and pea
I thought the video good, but mistaken as well. I think the problem is understanding the essence of a passion rather than the surface.Those years of trying jobs did enhance and make clear both your talent and passion.Sunny Boy wrote:Thanks Grump - good video. And he's right.
I kicked around for a few years at "dream" jobs I thought I was passionate about. Once I learned what those jobs were really like I found I wasn't really passionate about them. Then, 34 years ago, I was lead to a career by my abilities, only to find out that was my real passion.
Paul
That it now fits well does not preclude it fitting just as well in other endeavors.
- Sunny Boy
- Member
- Posts: 25724
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
Sometimes, .... our dreams have a way of lying to us.
For a while I was a "follow your dreams" job seeker. What I thought I was passionate about was based on what I "dreamed" the jobs were like. That is, until I tried them and then I found I didn't have all the abilities needed. When I gave up trying things I was passionate about and started finally following my abilities, I found my true passion.
I've been very lucky that my abilities and passion became my career. I'm now at retirement age. When asked if I'll retire and what will I do during retirement, my reply is, why should I ? I'll just be doing the same thing, but not getting paid.
Paul
For a while I was a "follow your dreams" job seeker. What I thought I was passionate about was based on what I "dreamed" the jobs were like. That is, until I tried them and then I found I didn't have all the abilities needed. When I gave up trying things I was passionate about and started finally following my abilities, I found my true passion.
I've been very lucky that my abilities and passion became my career. I'm now at retirement age. When asked if I'll retire and what will I do during retirement, my reply is, why should I ? I'll just be doing the same thing, but not getting paid.
Paul
Easy. Marry Hillary. But is it really worth it?jpete wrote:My passion is staying home and having people mail me checks. So far, haven't been able to figure out how to make a living at it.
Clinton Cash Formula: Give Money to Bill, Get Favors from Hill
http://www.breitbart.com/big-government/2016/05/28/trump-campaign-clinton-cash-formula-give-money-bill-get-favors-hill/
-
- Member
- Posts: 512
- Joined: Mon. Dec. 27, 2010 1:59 am
- Location: New Zealand
- Stoker Coal Boiler: MK2 #1
Its funny....i'm a tradesman, a Fitter/Turner/Welder.....i think the closest thing in the states is a millwright but thats a bit narrow in definition.
When I started my apprenticeship it wasn't what I wanted to do.....but I listened to someone the said the money is ok and that I don't need to work in engineering my whole life if I don't want to.....but its a good set of skills to have to fall back on if needed....i worked outside of the engineering field for a short period, I found the world outside is plagued with idiots.
Now i'm looking around at the people that went to university and racked up mass student loans etc....sure they're earning more than me but they have to pay off their student loan....and clothing wise, keeping up professional appearances doesn't come cheap, plus they need an expansive car that won't be a "marker of shame" in the opinion of their peers....etc,etc,etc
Factor all that in and suddenly it doesn't look like they are much earning more than me....and they can't build with their own mind & hands their own design coal stove and coal boiler
When I started my apprenticeship it wasn't what I wanted to do.....but I listened to someone the said the money is ok and that I don't need to work in engineering my whole life if I don't want to.....but its a good set of skills to have to fall back on if needed....i worked outside of the engineering field for a short period, I found the world outside is plagued with idiots.
Now i'm looking around at the people that went to university and racked up mass student loans etc....sure they're earning more than me but they have to pay off their student loan....and clothing wise, keeping up professional appearances doesn't come cheap, plus they need an expansive car that won't be a "marker of shame" in the opinion of their peers....etc,etc,etc
Factor all that in and suddenly it doesn't look like they are much earning more than me....and they can't build with their own mind & hands their own design coal stove and coal boiler
-
- Member
- Posts: 6446
- Joined: Mon. Apr. 16, 2007 9:34 pm
- Location: Central Maine
- Hand Fed Coal Stove: DS Machine 1300 with hopper
- Coal Size/Type: Blaschak Anthracite Nut
- Other Heating: Oil hot water radiators (fuel oil); propane
Those asking REALLY mean, "When are some of you old farts going away so I can have your job?".Sunny Boy wrote:I'm now at retirement age. When asked if I'll retire and what will I do during retirement, my reply is, why should I ? I'll just be doing the same thing, but not getting paid.