Gibraltar SCC coal stove Baffle plate

I have a Gibraltar SCC coal stove, I was wondering if there should be a baffle plate on the inside of the stove just below the 6” stack output. The stove has two L shaped brackets welded inside the stove at the top. When looking at the manual figure A-4: Model SCC it looks like there should be a baffle at the top.

ron87777 wrote:I have a Gibraltar SCC coal stove, I was wondering if there should be a baffle plate on the inside of the stove just below the 6” stack output. The stove has two L shaped brackets welded inside the stove at the top. When looking at the manual figure A-4: Model SCC it looks like there should be a baffle at the top.

Yes all of the stoves should have one Here are a few Places that have Parts

http://www.stovepartsplus.com/Merchant5 ... =GIBRALTOR

http://www.stovepartsunlimited.com/sect ... =Gibraltar

http://www.woodmanspartsplus.com/catalo ... i_id=10402

http://www.hearthstove.com/catalog.html

Coal Berner Thanks for getting back to me. I checked the parts houses listed none of them have one. Do you know if one can be made and what type metal can be used?

ron87777 wrote:Coal Berner Thanks for getting back to me. I checked the parts houses listed none of them have one. Do you know if one can be made and what type metal can be used?

Call the last one on the list They where made out of Cast Iron you gould use 1/4 to 1/2 inch S.S. plate Give the last one a call first I was told there is a old hardware store a few miles from me that as some Parts for these stoves I will check
and let you know I need some for mine anyway I will try this weekend to go there talk to you later

Thanks
If I know what size of the plate I might check to see if the local welding shop could make one. Do you know were I could get the measurements or how to measure the inside of the stove to have one made-up? Thank again ron