D520 Burnerplates

D520 BurnerPlates

PostBy: army5102 On: Tue May 06, 2008 9:31 am

What is the easiest way to replace cracked burner plates
Stove/Furnace Make: EFM coal stocker
Stove/Furnace Model: DF520

Re: D520 BurnerPlates

PostBy: stoker-man On: Tue May 06, 2008 10:29 am

Pictorial: Changing the burner plates

There is repair information on our section of this forum. For other information, view the pictorial articles in the efm section. it's the second listing from the top.
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove

Re: D520 BurnerPlates

PostBy: coal berner On: Tue May 06, 2008 3:23 pm

army5102 wrote:What is the easiest way to replace cracked burner plates
Unscrew the top pot ring then take
the grate screw out lift the grates out replace all three gaskets there should be one under Pot ring one under the top of the grates and one at the bottom of the grates 3/8 for the top 1/2 for the bottom Rope gaskets check Pot bushing where the auger goes threw the Pot check Auger bushing & Auger flights for wear check chimney you should be good for the season
coal berner
Stoker Coal Boiler: 1986 Electric Furnace Man 520 DF
Stove/Furnace Make: Electric Furnace Man
Stove/Furnace Model: DF520