Does anyone have a picture of a JG auger knuckle? I thought there was one on the forum but I cant find it.
It goes between the pot auger and bin auger.
BK
Picture of a Gentleman Janitor Auger Knuckle
-
StokerDon
- Site Moderator
- Posts: 7496
- Joined: Mon. Nov. 11, 2013 11:17 am
- Location: PA, Southern York County!
- Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
- Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
- Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
- Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood
Here is most of one. They are 3 pieces. If I remember correctly, the split part goes on the pot auger pipe and the solid part goes on the bin auger pipe.
This one is from a bigger GJ. Not the smaller GJ-51.
Hope that helps,
-Don
Hope that helps,
-Don
-
bksaun
- Member
- Posts: 1037
- Joined: Sat. Oct. 28, 2006 9:24 am
- Location: Hustonville, Ky
- Hand Fed Coal Boiler: Legacy SF-270
- Hand Fed Coal Stove: Hitzer 503
- Coal Size/Type: Stoker/Bit, Pea or Nut Anthracite
would that allow you to have the bin auger at an angle compared to the pot auger?
the old add I found says it would but they don't show a picture.
the knuckle that joins the augers is what I'm looking for if you have it?
the old add I found says it would but they don't show a picture.
the knuckle that joins the augers is what I'm looking for if you have it?
-
StokerDon
- Site Moderator
- Posts: 7496
- Joined: Mon. Nov. 11, 2013 11:17 am
- Location: PA, Southern York County!
- Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
- Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
- Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
- Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood
Oh, you mean the coupler.
It's just a stainless steel sleeve with pins.
-Don
-Don
-
StokerDon
- Site Moderator
- Posts: 7496
- Joined: Mon. Nov. 11, 2013 11:17 am
- Location: PA, Southern York County!
- Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
- Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
- Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
- Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood
Yes it does.bksaun wrote:would that allow you to have the bin auger at an angle compared to the pot auger?
-Don