Coaltrol TS2C for corn

Re: Coaltrol TS2C for corn

PostBy: WNY On: Sun Nov 27, 2016 4:47 pm

make sure the cable to the thermostat is not loose or dirty, that can cause it to run funny. had that happen to a friends stove, we tried everything, cleaned everything and it was the cable from the control box to the thermostat. just a thought.
WNY
 
Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
Coal Size/Type: Rice
Stove/Furnace Make: Keystoker, LL & CoalTrol
Stove/Furnace Model: 90K, Hyfire I, VF3000 Soon

Re: Coaltrol TS2C for corn

PostBy: sdimmick On: Sun Nov 27, 2016 11:28 pm

Cleaned the control module, shut down for a few hours to let stat reset and it seems to be working good. Thanks for all the help!
sdimmick
 
Other Heating: Corn furnace

Re: Coaltrol TS2C for corn

PostBy: pvolcko On: Wed Jan 04, 2017 6:21 pm

sdimmick, if you run into this issue again please give LMF a call (570-769-7775). They should be your first stop for technical support on the Corn-trol. If they can't help you out give us a call and we'll see what we can do.

There are some special settings in the corn version of our control that attempts to handle the situation you're talking about (check the manual under the SETUP menu listing for the STIR setting).
pvolcko