Connecting Thermostat

Connecting Thermostat

PostBy: Tryingitout On: Wed. Jan. 25, 2017 2:47 pm

I need to know if I am on the right track, with interconnecting my KAA-2 and furnace blower together? In the triple aquastat there are the 2 terminals for the stat. If run a single wire from 1 terminal to the blower circuit on my furnace, when the stat. calls for heat and completes the circuit it should start the blower right?
Stoker Coal Boiler: KAA-2
Hand Fed Coal Stove: Hitzer model 30-95 EZ Flow Sadly Retired
Coal Size/Type: Rice
Other Heating: Propane furnace/elec. water heater

Re: Connecting Thermostat

PostBy: McGiever On: Sat. Jan. 28, 2017 8:57 pm

Most of the time the furnace blower is already on a 24 volt relay, so use the coal thermostat to start and stop the blower as well.
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Coal Size/Type: PEA / ANTHRACITE
Other Heating: Ground Source Heat Pump
Stove/Furnace Make: Hydro Heat /Mega Tek