Bushing Fitted

Bushing fitted

PostBy: wilder11354 On: Sat Mar 25, 2017 8:38 am

Bushing has been fitted. last 1/16 turn to lock it is snug. Yet that will be ok, positive lock up plus with time it will loosen up some.
IMG_20170325_082148.jpg
(62.71 KiB) Viewed 6 times
View: New PagePopup • Select:BBCode
good snug fit, without being tight. will need a bushing wrench for this.
[nepathumb]80210[/nepathumb]

Barrel sticks out, thats because shroud on barrel is now needing to be fitted for width to slide, then shroud length will have to be adjusted for barrel going into battery(lock-up). Width first, then slowly do shroud length, while checking lock lugs on barrel to slide lug recess points.
IMG_20170325_082211.jpg
(69.92 KiB) Viewed 7 times
View: New PagePopup • Select:BBCode
shrouds just a bit to wide to fit slide opening width. Several thousands on each side need to be removed.
[nepathumb]80211[/nepathumb]
wilder11354
 
Hand Fed Coal Boiler: Harman SF260 Boiler
Coal Size/Type: nut or pea, anthracite
Other Heating: crown oil boiler, backup.if needed