waldo lemieux wrote:
Don, youve put together almost every imaginable FrankenBoiler out there, dont you have a work-around here?
I did notice the 350 stoker spacer but I was thinking the same thing Scott was thinking, Is it a 350 boiler?
If we are still thinking the stoker spacer could be a problem, Remove the bin auger/pipe, remove the sealing ring from the boiler side plate, loosen the feed pipe bolts. Then you can check if the feed pipe is bound up from the spacer being wrong.
If the pipe is bound up, just take a die grinder or large half round file, to the hole and make the pipe fit. Drill new holes for the sealing ring and put it back together.