Coal Bin Construction
-
- Member
- Posts: 35
- Joined: Thu. Jun. 05, 2008 1:12 am
- Location: cape cod
Beautiful! Especially that black shiney stuff. Adds a sense off bling to the bin.
-
- Member
- Posts: 21
- Joined: Thu. May. 29, 2008 3:14 pm
- Location: Southern Maine
stokin-railroad, the "door" is comprised of slats and does does not swing in or out. As the coal level goes down, the slats, which slide up and down and out, are taken out for easy access to the coal as the level goes down. All the way down to the last board, so that I can walk into the bin to get the coal out of the corners when it's down low .
- ablumny
- Member
- Posts: 340
- Joined: Thu. Jun. 19, 2008 9:02 pm
- Location: Holtsville, NY....Long Island
- Hot Air Coal Stoker Stove: Harman dvc500
- Coal Size/Type: Rice
3 ton Rice delivered ! What a fiasco. I thought the guy would back up, dump into the bin and be gone. An hour and 20 minutes later he's done. Apparently Rice doesnt flow so well and my bin hold 3 ton almost exactly so he had to get in there and start shoveling into the corners.
The coal chute idea was a bust but I did come up with a workable solution.
Anyway, I'll do a test burn in a few weeks and be ready for the season. Thanks for all that helped me through it!
Pictures and video's of the project from start to finish :
**Broken Link(s) Removed**
The coal chute idea was a bust but I did come up with a workable solution.
Anyway, I'll do a test burn in a few weeks and be ready for the season. Thanks for all that helped me through it!
Pictures and video's of the project from start to finish :
**Broken Link(s) Removed**
Last edited by ablumny on Sat. Aug. 02, 2008 12:30 pm, edited 1 time in total.
- Freddy
- Member
- Posts: 7301
- Joined: Fri. Apr. 11, 2008 2:54 pm
- Location: Orrington, Maine
- Stoker Coal Boiler: Axeman Anderson 130 (pea)
- Coal Size/Type: Pea size, Superior, deep mined
Better than YOU getting in there!ablumny wrote:he had to get in there and start shoveling
Coal forms a pile with 30 degree angles. If you want it to flow through a door you have to imagine that 30* angle and make sure the coal isn't blocked in the angle. Here's a sketch.
Attachments
- ablumny
- Member
- Posts: 340
- Joined: Thu. Jun. 19, 2008 9:02 pm
- Location: Holtsville, NY....Long Island
- Hot Air Coal Stoker Stove: Harman dvc500
- Coal Size/Type: Rice
By the way, I've received a couple of question via email and PM about Bethlehem Coal. YES I recommend them ! Ron and Linda, great people and understand what customer service means and their prices are in line or better than others that quoted me.
Last edited by ablumny on Sat. Apr. 01, 2017 12:33 am, edited 2 times in total.
Reason: <removed dead link>
Reason: <removed dead link>
- Freddy
- Member
- Posts: 7301
- Joined: Fri. Apr. 11, 2008 2:54 pm
- Location: Orrington, Maine
- Stoker Coal Boiler: Axeman Anderson 130 (pea)
- Coal Size/Type: Pea size, Superior, deep mined
Hey! You got it workin' now! Now.... get a pet rat, put his exercise wheel in the coal path. Add some flappers to the outside of his wheel. Have him run toward the bin & the coal will auto feed into your bucket.
- coalkirk
- Member
- Posts: 5185
- Joined: Wed. May. 17, 2006 8:12 pm
- Location: Forest Hill MD
- Stoker Coal Boiler: 1981 EFM DF520 retired
- Hand Fed Coal Stove: Jotul 507 on standby
- Coal Size/Type: Lehigh anthracite/rice coal
Just repeat that process 158 times and you'll empty that bin. I'd suggest trying a hoe. No not that kind of hoe, a garden hoe.
-
- Member
- Posts: 42
- Joined: Fri. Aug. 08, 2008 7:24 pm
- Location: laceyville, pa
Hey guys, first time on site! I love all your ideas for bins. I'm building one right now my self, I poured a 6'x8'x4" pad in my cellar. soon to start framing I was going to ask 2x4 o2x6 but you've already answered that my only other question is treated ply or reg??
soon to recieve my new koker
soon to recieve my new koker
- Richard S.
- Mayor
- Posts: 15243
- Joined: Fri. Oct. 01, 2004 8:35 pm
- Location: NEPA
- Stoker Coal Boiler: Van Wert VA1200
- Coal Size/Type: Buckwheat/Anthracite
You don't need treated plywood especially on a inside bin out of the weather. Regular plywood is fine. If you want to take the time adding a coat or two of paint will certainly help but that's not necessary either.
-
- Member
- Posts: 42
- Joined: Fri. Aug. 08, 2008 7:24 pm
- Location: laceyville, pa
thanks for the input