Barometric damper for a direct vent stove ??

Re: Barometric damper for a direct vent stove ??

PostBy: traderfjp On: Fri Aug 08, 2008 11:52 pm

My house is around 2k sq. ft. and I used about 3 tons of coal.
traderfjp
 
Stove/Furnace Make: Alaska
Stove/Furnace Model: Channing 3

Re: Barometric damper for a direct vent stove ??

PostBy: Adamiscold On: Sat Aug 09, 2008 8:10 am

Ash I live right next door so if you ever need any help let me know. I don't know anything about setting a stove up yet since I haven't done it but if you need a hand getting it in place.
Adamiscold
 
Stove/Furnace Make: Chubby Sr. Old School

Re: Barometric damper for a direct vent stove ??

PostBy: ashburnham55 On: Sat Aug 09, 2008 5:28 pm

Trader,
I just bought 2 tons about 3 weeks ago and since then I have been worrying that I did not have enough so I just bought an another ton yesterday afternoon just in case. So hearing that you are using 3 tons with almost double the sq footage makes me feel a lot better. I appreciate all your help.

Adam,
Thank you..I might take you up on that offer.. When are you getting your stove ??
Same thing goes here with me, if you need any help just let me know.
ashburnham55
 
Baseburners & Antiques: Magee Crown 112
Coal Size/Type: Nut
Stove/Furnace Make: Magee


Re: Barometric damper for a direct vent stove ??

PostBy: Adamiscold On: Sun Aug 10, 2008 6:59 am

Ash,
We have our stove, were just doing work around the house while trying to figure out how to install it and what we would need to do it. Would like to do it soon just to get it over with but we're finishing up on a few projects before we invite the building inspector into our home to inspect the stove :shifty:
Adamiscold
 
Stove/Furnace Make: Chubby Sr. Old School