Behind stove wall

Behind stove wall

PostBy: frankdetroit On: Thu Oct 09, 2008 7:48 am

If the stove is the correct distance from the wall (12'' or more) do I need to protect the wall from heat or can I just leave the plaster walls alone?
Thanks
LL pioneer bv
frankdetroit
 

Re: Behind stove wall

PostBy: Adamiscold On: Thu Oct 09, 2008 8:14 am

Frank if the clearance listed is 12 inches, then it's 12 inches from combustibles so as long as you are 12 inches away from the sheet rock you are fine.
Adamiscold
 
Stove/Furnace Make: Chubby Sr. Old School

Re: Behind stove wall

PostBy: Jerry & Karen On: Thu Oct 09, 2008 8:42 pm

FrankD,
Ul calls for 12", but I like to see 16" or more.
Jerry
Jerry & Karen
 

Visit Leisure Line Stove

Re: Behind stove wall

PostBy: 4tees On: Sat Oct 11, 2008 1:46 pm

I am starting the install for my Hyfire II....Everywhere I search I see the 12" requirement for stove pipe to back wall for combustibles...

What if the back wall is not combustible? My Hyfire II is in basement in front of a stone and mortar foundation. I would like to push the stove back closer to the wall to give more room in front to work.

Can't seem to find anything in writing with my searches of building codes for the clearance required if any to non-combustible walls.

Thanks...
4tees
 
Stove/Furnace Make: Leisure Line
Stove/Furnace Model: Hyfire II with hot air jacket

Re: Behind stove wall

PostBy: Jerry & Karen On: Sat Oct 11, 2008 6:51 pm

You can be right against a non=combustable wall.
Jer
Jerry & Karen
 

Re: Behind stove wall

PostBy: StanT On: Tue Oct 14, 2008 5:52 am

My stack temp is only 100 to 120 degrees, Not near enough to cause a fire. If you check yours you will know for sure.

Good luck, Stan
StanT
 
Stove/Furnace Make: Leisureline
Stove/Furnace Model: econo1

Visit Leisure Line Stove