Xtra Convection Blower
-
- Member
- Posts: 152
- Joined: Sun. May. 11, 2008 1:48 pm
- Location: south central pa
- Hot Air Coal Stoker Furnace: LL Pioneer
- Coal Size/Type: Rice
- Other Heating: Hot air oil
My 2007 model TV Pioneer has the power plug which runs thru the safety switch,then plugw go from the black box to the feeder mechanism,combustion blower,and convection blower,there is one unused plug with a green band on it,my assumption is that would be for the optional igniter.I'm hoping it is for the second convection blower which the Pocono and Hyfire have,my idea is to get a second convection blower and mount it directly to the existing ductwork about 8 feet from the stove, and plug it into the remaining plug and have the blower circulate the warm air from the stove room thruout the house,this would be perfect because the furnace will only come on if the stove fire goes out and the 2 blowers won't be pushing against each other,and it will run when the stove tells it to.If it is the igniter plug can I wire it to the convection plug inside the black box and accomplish this without overloading the circuit??Coaltrol is a TS2. RichB
- Rick 386
- Member
- Posts: 2508
- Joined: Mon. Jan. 28, 2008 4:26 pm
- Location: Royersford, Pa
- Stoker Coal Boiler: AA 260 heating both sides of twin farmhouse
- Hot Air Coal Stoker Stove: LL Hyfire II w/ coaltrol in garage
- Coal Size/Type: Pea in AA 260, Rice in LL Hyfire II
- Other Heating: Gas fired infared at work
- Contact:
Busted Wing,
The green colored plug is for the igniter.
I suggest contacting Coal Trol direct for your question. Very nice and easy to talk to the guys there. 1-315-299-3589
------------------------------------------------------
Rick
The green colored plug is for the igniter.
I suggest contacting Coal Trol direct for your question. Very nice and easy to talk to the guys there. 1-315-299-3589
------------------------------------------------------
Rick