Chimney Construction in Progress
- dkononczuk
- Member
- Posts: 138
- Joined: Tue. Feb. 05, 2008 5:07 pm
- Location: NEPA
- Stoker Coal Boiler: Harman VF-3000
- Coal Size/Type: Rice
One thing I've noticed.
Now that the chimney is completed, I noticed that it blows air
to inside of my basement instead of out. Is that normal?
Should I see the air being sucked out of the basement, or I did something
wrong. We are in process of removing my propane boiler and putting
the VF3000 in place.
Dan
Now that the chimney is completed, I noticed that it blows air
to inside of my basement instead of out. Is that normal?
Should I see the air being sucked out of the basement, or I did something
wrong. We are in process of removing my propane boiler and putting
the VF3000 in place.
Dan
- coalkirk
- Member
- Posts: 5185
- Joined: Wed. May. 17, 2006 8:12 pm
- Location: Forest Hill MD
- Stoker Coal Boiler: 1981 EFM DF520 retired
- Hand Fed Coal Stove: Jotul 507 on standby
- Coal Size/Type: Lehigh anthracite/rice coal
Your chimney is an external one and is cold, so air is dropping in it. I have the same thing with mine. you will need to reverse that before lighting your boiler. Once your boiler is going I think you'll be ok. My reverse draft is not reall strong so I can reverse mine just by lighting my charcoal and turning on the blower. If you have a cleanout door in your chimney, you could burn some newspaper there just before you light the boiler or as you light the boiler to reverse the draft.
- Blackdiamonddoug
- Member
- Posts: 328
- Joined: Wed. Jun. 11, 2008 8:52 am
- Location: haverhill Ma
Great job
I havn't done any seriour block work
just put bricks in a window opening
BDD
I havn't done any seriour block work
just put bricks in a window opening
BDD
- dkononczuk
- Member
- Posts: 138
- Joined: Tue. Feb. 05, 2008 5:07 pm
- Location: NEPA
- Stoker Coal Boiler: Harman VF-3000
- Coal Size/Type: Rice
Here is a completed chimney.
No more stone work for a while.
Thanks for all the comments.
Dan
No more stone work for a while.
Thanks for all the comments.
Dan
Attachments
- sterling40man
- Member
- Posts: 1645
- Joined: Sat. May. 03, 2008 11:52 am
- Location: Northern Maine
- Stoker Coal Boiler: Keystoker K6
Very nice Dan!!
- rockwood
- Member
- Posts: 1381
- Joined: Sun. Sep. 21, 2008 7:37 pm
- Location: Utah
- Hot Air Coal Stoker Furnace: Stokermatic
- Hand Fed Coal Stove: Rockwood Stoveworks Circulator
- Baseburners & Antiques: Malleable/Monarch Range
- Coal Size/Type: Lump and stoker + Blaschak-stove size
Did you have any problems with backdraft during winter?dkononczuk wrote:One thing I've noticed.
Now that the chimney is completed, I noticed that it blows air
to inside of my basement instead of out. Is that normal?
Should I see the air being sucked out of the basement, or I did something
wrong. We are in process of removing my propane boiler and putting
the VF3000 in place.
Dan
- dkononczuk
- Member
- Posts: 138
- Joined: Tue. Feb. 05, 2008 5:07 pm
- Location: NEPA
- Stoker Coal Boiler: Harman VF-3000
- Coal Size/Type: Rice
No backdraft at all.
The baro stayed fully open most of the time and the draft was still at about .4
I guess like others suggested once the chimney got hotter it never pulled cold air in.
Now that it's getting warmer, the baro keeps almost closed all the time and
I still get the reading of about .4
Chimney is very tall, I guess that helps a lot.
Dan
The baro stayed fully open most of the time and the draft was still at about .4
I guess like others suggested once the chimney got hotter it never pulled cold air in.
Now that it's getting warmer, the baro keeps almost closed all the time and
I still get the reading of about .4
Chimney is very tall, I guess that helps a lot.
Dan
- dkononczuk
- Member
- Posts: 138
- Joined: Tue. Feb. 05, 2008 5:07 pm
- Location: NEPA
- Stoker Coal Boiler: Harman VF-3000
- Coal Size/Type: Rice
No thank you.ceccil wrote:Congrats, thats a work of art. You should go into business for yourself.
Jeff
I understand why pros charge so much just to built a "simple" chimney.
Hard, hard work.
I got quoted about 7K to have this chimney built by a pro.
Believe me, every penny would be worth it.
My bottom line is that it cost me around $1500 from start to finish, so I did save a lot.
I learned a lot too. Learned enough not to built another chimney that is above the first floor.
(I'm afraid of heights above first floor, so it was a challenge to go much higher than that)
Dan
- Freddy
- Member
- Posts: 7301
- Joined: Fri. Apr. 11, 2008 2:54 pm
- Location: Orrington, Maine
- Stoker Coal Boiler: Axeman Anderson 130 (pea)
- Coal Size/Type: Pea size, Superior, deep mined
Beautiful job! I like the looks of the double part at the bottom. Gives it a touch of class. Congrats on a job well done.