I wish to now add 1100 gallon hot water storage.( evacuated solar to heat in late spring etc). Got the tank. Boiler to tank and return. Heating system from tank and return. How do I control the boiler to storage tank pump. If I turn on with an aquastat it will continue to run until storage is below set point! How do I tell the pump boiler is lit - start pumping, boiler is out - shut off. Got me stumped????
Robby
I Need Help Again
- Freddy
- Member
- Posts: 7301
- Joined: Fri. Apr. 11, 2008 2:54 pm
- Location: Orrington, Maine
- Stoker Coal Boiler: Axeman Anderson 130 (pea)
- Coal Size/Type: Pea size, Superior, deep mined
Per usual, I'm a bit confused. Why heat this huge tank with an oil burner?
If all you want to do is have the pump run while the oil burner is running, just hook the pump to the burner wires. Burner comes on, pump comes on, burner shuts off, pump shuts off.Robby wrote:How do I tell the pump boiler is lit
- Dallas
- Member
- Posts: 746
- Joined: Mon. Nov. 12, 2007 12:14 pm
- Location: NE-PA
- Hand Fed Coal Stove: Modified Russo C-35
- Other Heating: Oil Hot Air
I don't exactly see the picture ... give us a bit more of an idea what you are trying to do.
My thoughts are, that you might need a "differential controller", typically used with solar applications.
My thoughts are, that you might need a "differential controller", typically used with solar applications.
- coalmeister
- Member
- Posts: 668
- Joined: Fri. May. 23, 2008 3:13 pm
- Location: Between Rochester & Buffalo NY
I would think you need an aquastat on the tank or, just over ride until the tank is heated up then just use it with the present control system and insulate the heck out of the tank