Axeman-Anderson Manuals and Parts List

U235a4 · Post by **U235a4** » Wed. Nov. 14, 2007 7:54 pm

Axeman-Anderson Manuals from different years and a parts list. The first manual (AA2.pdf) and parts list (AAP.pdf) was sent to me this year by AA and the third manual (AA3.pdf) is from 1958 and it's not complete since I didn't notice it was two sided so I'll correct this Thursday. The 2 manual (AA1.pdf) is from sometime between the two. HAPPY READING

Matthaus · Post by **Matthaus** » Fri. Nov. 16, 2007 7:51 pm

Thanks, always fun to get more reading material on the science project!

europachris · Post by **europachris** » Tue. Nov. 20, 2007 9:14 am

U235a4 wrote:Axeman-Anderson Manuals from different years and a parts list. The first manual (AA2.pdf) and parts list (AAP.pdf) was sent to me this year by AA and the third manual (AA3.pdf) is from 1958 and it's not complete since I didn't notice it was two sided so I'll correct this Thursday.

Have you had a chance to correct the scan on the aa3.pdf manual? I still see it's missing pages. Looking forward to having some light reading for Turkey Day!

Chris

LsFarm · Post by **LsFarm** » Thu. Nov. 22, 2007 2:44 pm

CoalHeat · Post by **CoalHeat** » Mon. Dec. 03, 2007 9:32 pm

AA Anthratube brochure.

Flyer5 · Post by **Flyer5** » Sat. Nov. 08, 2008 3:57 pm

This info was requested . I figured I would post for everyone as well . We need to have a documentation section for boilers and stoves for easier access. Is this possible ?

U235a4 · Post by **U235a4** » Sat. Nov. 08, 2008 8:31 pm

Flyer5 wrote:This info was requested . I figured I would post for everyone as well . We need to have a documentation section for boilers and stoves for easier access. Is this possible ?

Flyer5, thanks for posting that I've been thru this even with out the document and this would've help alot. last winter end of December to be exact I my ashing problems came back and I found out when I went to check the calibration that my anthrastat was about 80F off..... on the cool side. once I fixed this my ashing problems left town.

cabinover · Post by **cabinover** » Sun. Aug. 22, 2010 9:07 pm

Does anyone have the above .pdf images stored anywhere? I thought I did but can't find my parts list. The ones above are gone unless I'm just not smart enough to figure out how to click correctly.

Just looking for a parts list, not so much the operating manual. Think I have them hard copied somewhere.

Post by **Rob R.** » Mon. Aug. 23, 2010 10:31 am

I have everything but the parts list. I'm sure if you call Axeman Anderson they will provide you with a current parts list.

-Rob

cabinover · Post by **cabinover** » Mon. Aug. 23, 2010 10:42 am

Thanks Rob. I'd be happy to have the manuals as well since I cannot seem to locate them either. I think I have old-timers or something.

Post by **Rob R.** » Mon. Aug. 23, 2010 12:00 pm

Here you go.

-Rob

cabinover · Post by **cabinover** » Mon. Aug. 23, 2010 12:12 pm

Thank you Rob, I'll put them safely away this time.

Post by **Richard S.** » Tue. Aug. 24, 2010 12:06 am

Unfortunately I had to remove these files because It's copyrighted material and I don't have the permission from AA to host them.

brckwlt · Post by **brckwlt** » Tue. Aug. 24, 2010 5:11 pm

Richard S. wrote:Unfortunately I had to remove these files because It's copyrighted material and I don't have the permission from AA to host them.

that -----------> s u c k s

cabinover · Post by **cabinover** » Wed. Aug. 25, 2010 7:03 am

Sorry Richard, I didn't give that a thought. Don't want anyone to get in any trouble over this so I asked the girl at AA to send me a parts list with my order. She was more than happy to help me out.

Axeman-Anderson Manuals and Parts List

Attachments