feed regultor schematic

feed regultor schematic

PostBy: skotrod On: Mon Dec 31, 2012 5:40 pm

Hi, I bought a Alaska Channing rear vent model at an auction this summer to install in my pole barn/shop. After installing and hooking everything up last week, I found I was short the coal feed control unit. I went and bought one last week with the pig tail as there was nothing but a power cord coming out of the feed motor/blower.
I went back today to get a schematic to wire the controller, when I got home the schematic shows a green, a white and a black wire coming out of the controller. The controller actually has a brown, a light blue and a yellew with a green stripe. Does any one know the corresponding color combination? I'd sure like to finish this up and get the stove fired up. Any help is appreciated. Thanks, Scott
skotrod
 
Stove/Furnace Make: Alaska
Stove/Furnace Model: Channng

Re: feed regultor schematic

PostBy: Rigar On: Thu Jan 03, 2013 12:29 pm

Brown/ black
blue/ white
yellow with green tracer/ green
. .
your color coding appears to be European... I am 90 percent certain on white and black wires
100% certain on the ground
Rigar
 
Hot Air Coal Stoker Furnace: Keystoker A 150
Coal Size/Type: anthracite rice
Stove/Furnace Make: Keystoker
Stove/Furnace Model: A 150 warm air furnace

Visit Lehigh Anthracite