Magic Heat Reclaimers?

Re: Magic Heat Reclaimers?

PostBy: McGiever On: Sun Feb 03, 2013 4:14 pm

I had another brand of reclaimer on a forced air wood furnace I used for 18 years, it cycled on and off w/ a snap switch and had a built in heat exchanger tube scrapper for the creosote buildup. Is there no scrapper built in for the *Magic Heat Reclaimer?

Come to think of it, if I were to have one of these, I'd just *whack it* w/ a rubber mallet or hammer every so often to knock the fly ash loose and clean it better at my regular cleaning interval. ;)
McGiever
 
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hot Air Coal Stoker Stove: HARMAN MAGNUM
Hand Fed Coal Stove: RADIANT HOME AIR BLAST
Baseburners & Antiques: OUR GLENWOOD 111 BASEBURNER "1908"
Coal Size/Type: PEA / ANTHRACITE, NUT-STOVE / ANTHRACITE
Other Heating: Ground Source Heat Pump
Stove/Furnace Make: Hydro Heat /Mega Tek

Re: Magic Heat Reclaimers?

PostBy: coalkirk On: Sun Feb 03, 2013 4:57 pm

They do have a heat exchanger cleaning provision. It scrapes across the tubes. I'm probably going to try it. I run my combustion fan 24/7 so my flue stays alittle warmer than a system that only cycles. We'll see.
coalkirk
 
Stoker Coal Boiler: Harman VF3000
Coal Size/Type: antrhcite/rice coal