TLC2000 Brick Retainers

TLC2000 Brick Retainers

PostBy: zeeklu On: Sat Feb 16, 2013 6:14 pm

I've had my TLC2000 for around 5 years and lately I've been having problems with the angle iron pieces that hold the bottom of the fire bricks in place. They warp from the heat and come loose and jam the shaker grates. I took them all out and I'll see what happens. I can't see it being any trouble because the firebricks are buried in the coal and they really can't go anywhere . Has anybody else had this trouble. http://hearthnhome.com/downloads/servic ... LC2000.pdf They are #14 and go inside the bricks. They are only held in by little clips at each end of the angle.They warp a little and pop out. Thanks, Chris
zeeklu
 
Hand Fed Coal Stove: Harman TLC2000
Coal Size/Type: nut
Stove/Furnace Make: Harman
Stove/Furnace Model: TLC 2000

Re: TLC2000 Brick Retainers

PostBy: EasyRay On: Tue Feb 19, 2013 8:51 pm

This is my 6th season with mine and no problems with them yet. :)
EasyRay
 
Hand Fed Coal Stove: Harman TLC 2000
Coal Size/Type: Pea,Nut or Stove

Re: TLC2000 Brick Retainers

PostBy: zeeklu On: Wed Feb 20, 2013 8:09 pm

It's my 5th season and I never had a problem before. I guess I'm the only one. It's not a big deal,it seems fine without them . It was just annoying having to shut down and remove them. It did give me a chance to clean out though. Thanks for the reply, Chris
zeeklu
 
Hand Fed Coal Stove: Harman TLC2000
Coal Size/Type: nut
Stove/Furnace Make: Harman
Stove/Furnace Model: TLC 2000

Visit Hitzer Stoves

Visit Hitzer Stoves