Lead print..erasable.

Lead print..erasable.

PostBy: wilder11354 On: Tue Sep 17, 2013 10:16 pm

Figured out what i need to do, rough sketched it to prints of relay wiring, and penciled in stage module switch and 24V transformer, and end switch of daisy chained zone relays. still need to mount transformer to box. right side . 8x8x4deep pull box to do all the connections in. Gonna use stranded wire for 120V circuits for ease of bending and tying off.
P9170330.JPG
(83.88 KiB) Viewed 10 times
View: New PagePopup • Select:BBCode
[nepathumb]43757[/nepathumb]
P9170331.JPG
(79.87 KiB) Viewed 11 times
View: New PagePopup • Select:BBCode
[nepathumb]43758[/nepathumb]
P9170332.JPG
(80.51 KiB) Viewed 8 times
View: New PagePopup • Select:BBCode
[nepathumb]43759[/nepathumb]
P9170333.JPG
(81.18 KiB) Viewed 3 times
View: New PagePopup • Select:BBCode
[nepathumb]43760[/nepathumb]
P9170334.JPG
(82.71 KiB) Viewed 18 times
View: New PagePopup • Select:BBCode
[nepathumb]43762[/nepathumb]
wilder11354
 
Hand Fed Coal Boiler: Harman SF260
Coal Size/Type: nut or pea, anthracite
Other Heating: crown oil boiler, backup.if needed

Re: Lead print..erasable.

PostBy: wilder11354 On: Sun Sep 29, 2013 8:11 pm

ran short of TT wire for control side of wiring, and misplaced DIN rail for mounting the slave stage module. Tomorrows another day, and it will be finished by wednesday, and smoke tested(hope no smoke).
P9290336.JPG
(83.39 KiB) Viewed 7 times
View: New PagePopup • Select:BBCode
[nepathumb]44043[/nepathumb]
P9290337.JPG
(83.45 KiB) Viewed 5 times
View: New PagePopup • Select:BBCode
[nepathumb]44044[/nepathumb]
wilder11354
 
Hand Fed Coal Boiler: Harman SF260
Coal Size/Type: nut or pea, anthracite
Other Heating: crown oil boiler, backup.if needed