Thinking of switching from wood to coal

Re: Thinking of switching from wood to coal

PostBy: nepa641 On: Thu Jan 16, 2014 9:05 pm

Will do. If I end up going full bore with coal I'll most likely end up making one as an insert for my stove.
nepa641
 

Re: Thinking of switching from wood to coal

PostBy: windyhill4.2 On: Thu Jan 16, 2014 9:11 pm

The stoker i mentioned is only one style,i was thinking of another thread at the same time,there are a few different style stokers,yes some do use a feed screw.If you can find it i believe ls farm had a thread about his wood burner mod where he stuck a stoker in it,can't remember where it is tho.
windyhill4.2
 
Stoker Coal Boiler: 1960 EFM520 installed in truck box
Hand Fed Coal Stove: Crane 404 with variable blower
Coal Size/Type: 404-nut, 520 rice ,anthracite for both

Re: Thinking of switching from wood to coal

PostBy: mcrchap On: Mon Jan 20, 2014 4:42 pm

The biggest challenge you will have is shaking the coal ash. With wood, I'm told, much the ash provides a support for heat. But with coal you've got to get rid of the ash and keep air flowing up through the coal. Years ago I bought a wood/coal furnace from a wisconsin company called BK Industries. The furnace burned wood fine but the shaker grated were terrible! I had to let the fire burn out, clean out the ash and then build a new fire every 3 days. That furnace went out the door never to return!
I saw an out door unit advertised on line built in the mid west. They demonstrated their grates. I would not buy one for love nor money. The grates re not held down, they jump up and down. They'll be jammed after the first or second rake! Trouble in the making.

Good luck if you don't have good shaking grates.
mcrchap
 
Hot Air Coal Stoker Furnace: Keystoker A 90
Coal Size/Type: rice
Other Heating: New Yorker Oil boiler
Stove/Furnace Make: keystoker
Stove/Furnace Model: Econo