Vigilant II is just humming along!!!

Re: Vigilant II is just humming along!!!

PostBy: michaelanthony On: Thu Feb 13, 2014 7:39 am

It could be for the little fry pan shaped air inlet on the left of the stove.
michaelanthony
 
Hand Fed Coal Stove: Vigilant 2310, gold marc box, vogelzang pot belly
Coal Size/Type: Pea, and a little nut
Other Heating: Very cold FHA oil furnace

Re: Vigilant II is just humming along!!!

PostBy: Rich W. On: Thu Feb 13, 2014 10:37 am

I thought the spring might be for the secondary air inlet too, in order to keep it close to the hole, but my Vigilant doesn't have one. I didn't check my Resolute yet, but I seem to remember seeing one that was spring loaded. Anyway...
VPB...THANK YOU for taking the time to describe the procedure for adding the bushing. This will be a springtime project (if winter ever ends!), and in the meantime I'll look for a replacement bushing and post it here if and when I find one. I'll have to determine size and thread count first. Thanks again.
Rich W.
 
Hand Fed Coal Stove: Vermont Castings Vigilant Multi-Fuel
Coal Size/Type: Nut
Other Heating: System 2000 Oil Burner

Re: Vigilant II is just humming along!!!

PostBy: VigIIPeaBurner On: Thu Feb 13, 2014 1:31 pm

Glad to help, Rich W. The bushing shows up on the expanded parts view of the manual. However, it is not assigned a part number nor is it listed among the parts list. I thought it might logically be part of a shaker rod assembly but I've only found the rod listed separately.
VigIIPeaBurner
 
Hot Air Coal Stoker Furnace: Keystoker Koker
Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
Other Heating: #2 Oil Furnace

Visit Hitzer Stoves

Re: Vigilant II is just humming along!!!

PostBy: Rich W. On: Thu Feb 13, 2014 2:10 pm

Once I determine the specs I think I'll be able to find a bushing. I searched for "threaded bushing" online and found some promising results.
Rich W.
 
Hand Fed Coal Stove: Vermont Castings Vigilant Multi-Fuel
Coal Size/Type: Nut
Other Heating: System 2000 Oil Burner

Re: Vigilant II is just humming along!!!

PostBy: bchill61 On: Thu Feb 13, 2014 9:45 pm

you can find that bushing in the lamp repair drawers at your local hardware store Its a lamp socket nipple
bchill61
 
Stove/Furnace Make: Vermont castings
Stove/Furnace Model: vigilant 1977

Re: Vigilant II is just humming along!!!

PostBy: rsunbrook On: Thu Feb 13, 2014 9:58 pm

The bushing does have a part number. If you go to the Discount Stove Parts web site (link below) and look at the parts list for the 2310 Vigilant II, it is the last two items. p/n 1201903 - Shaker Hole Jamb Bushing and p/n 1201904 - Oversize Shaker Hole Bushing. A couple of years ago I broke my bushing while I was replacing the shaker rod and didn't realize that it was threaded into the stove. I talked with the guy at Discount Stove Parts and he explained that the oversize bushing is for cases where the original bushing fell out and people kept using the stove and wore the hole oversize. Hope that helps.

http://www.discountstove.com/

Rick
rsunbrook
 
Hand Fed Coal Stove: Vigilant Coal - Vermont Castings
Coal Size/Type: Hard nut
Other Heating: Vermont Castings Resolute

Re: Vigilant II is just humming along!!!

PostBy: michaelanthony On: Thu Feb 13, 2014 10:27 pm

Welcome and thank you both rsunbrook,bchill61. This forum is a wealth of information and an issue draws out the best of folks. I often wonder how many non-members are reading this. Thanks again
michaelanthony
 
Hand Fed Coal Stove: Vigilant 2310, gold marc box, vogelzang pot belly
Coal Size/Type: Pea, and a little nut
Other Heating: Very cold FHA oil furnace

Re: Vigilant II is just humming along!!!

PostBy: Rich W. On: Fri Feb 14, 2014 12:02 am

Well said, MichaelAnthony! One of the smallest parts on our wonderful stoves, and members come out to get it done! Fantastic!
Rich W.
 
Hand Fed Coal Stove: Vermont Castings Vigilant Multi-Fuel
Coal Size/Type: Nut
Other Heating: System 2000 Oil Burner

Re: Vigilant II is just humming along!!!

PostBy: Rich W. On: Sun Feb 23, 2014 8:55 pm

Finally, a nice spring like weekend here in Rhode Island to break up the winter. This gave me a chance to see how well I can idle my Multi-Fuel Vigilant. Answer...very nicely (I think)! I've been running it at 275* for two days, with the exception of a mid-day reload today, when I ran it hot enough to get the coal involved, and then backed it down. I said "I think" because I'd like to know if running it at a low temp that does not support burning off the coal gas is causing any harm, other than loss of energy. Thanks in advance for your feedback. Rich W.
Rich W.
 
Hand Fed Coal Stove: Vermont Castings Vigilant Multi-Fuel
Coal Size/Type: Nut
Other Heating: System 2000 Oil Burner

Re: Vigilant II is just humming along!!!

PostBy: michaelanthony On: Mon Feb 24, 2014 3:00 pm

[quote="Rich W."]Finally, a nice spring like weekend here in Rhode Island to break up the winter. This gave me a chance to see how well I can idle my Multi-Fuel Vigilant. Answer...very nicely (I think)! I've been running it at 275* for two days, with the exception of a mid-day reload today, when I ran it hot enough to get the coal involved, and then backed it down. I said "I think" because I'd like to know if running it at a low temp that does not support burning off the coal gas is causing any harm, other than loss of energy. Thanks in advance for your feedback. Rich W.[/quote]

There are a couple things you can try, first you could run pea size coal during the warmer weather with a little blue flame, second burning nut' size you can give it some more primary air in order to get the gas burn off and try the little fry pan air inlet to cool the exhaust and the stove, third all of the above and adjust the window stat's :) . The only waste or as you said, "loss of energy" to me would be to burn heating oil! It's tinkering season.
Mike.

P.s. you can try VigilPeaburner's smaller fire box set up! check out his video, it's pretty cool.
michaelanthony
 
Hand Fed Coal Stove: Vigilant 2310, gold marc box, vogelzang pot belly
Coal Size/Type: Pea, and a little nut
Other Heating: Very cold FHA oil furnace

Re: Vigilant II is just humming along!!!

PostBy: Rich W. On: Mon Feb 24, 2014 3:37 pm

All good thoughts...thanks! I have a few bags of pea for this spring, but I was just tinkering with this recent two day "heat wave," so I didn't crack them out. I love the smaller firebox idea; again that will be for longer than a couple of days.

And I love the idea of tuning the primary and secondary air...I guess I should just play when I can be with the stove and monitor the reactions. Fun stuff! Thanks again.
Rich W.
 
Hand Fed Coal Stove: Vermont Castings Vigilant Multi-Fuel
Coal Size/Type: Nut
Other Heating: System 2000 Oil Burner

Re: Vigilant II is just humming along!!!

PostBy: VigIIPeaBurner On: Tue Mar 18, 2014 10:16 pm

Hard to believe I'm still going strong on March 18. I'm usually stepping it back quite a few notches by now. Still going full throttle.
Attachments
image.jpg
(90.13 KiB) Viewed 11 times
View: New PagePopup • Select:BBCode
I love top-loading stoves. Here's a shot looking straight down on top of the fire, untouched after 14 1/2 hours.
[nepathumb]50291[/nepathumb]
VigIIPeaBurner
 
Hot Air Coal Stoker Furnace: Keystoker Koker
Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
Other Heating: #2 Oil Furnace

Re: Vigilant II is just humming along!!!

PostBy: michaelanthony On: Wed Mar 19, 2014 7:57 am

[quote="VigIIPeaBurner"]Hard to believe I'm still going strong on March 18. I'm usually stepping it back quite a few notches by now. Still going full throttle.[/quote]

Full steam ahead, and I don't see an end soon. The weather forecast is winter, winter, and more cold. I am buying bagged coal weekly and hopefully I can "ton up" when I get back to work as HB so eloquently stated.
Something To Remember,My Coal Faithful !
michaelanthony
 
Hand Fed Coal Stove: Vigilant 2310, gold marc box, vogelzang pot belly
Coal Size/Type: Pea, and a little nut
Other Heating: Very cold FHA oil furnace

Re: Vigilant II is just humming along!!!

PostBy: VigIIPeaBurner On: Sat Apr 12, 2014 3:12 pm

At this rate there's a few weeks' worth of nut left in my bin. Vigilant is pulling easy 28 hr burns on 23lb buckets.

Humming, just humming . . . On the first match :)
Attachments
image.jpg
(111.17 KiB) Viewed 2 times
View: New PagePopup • Select:BBCode
This was three weeks ago. It's at half of the pictured volume.
[nepathumb]50817[/nepathumb]
image.jpg
(101.23 KiB) Viewed 6 times
View: New PagePopup • Select:BBCode
Three windowstats operating on the first floor.
[nepathumb]50818[/nepathumb]
image.jpg
(123.36 KiB) Viewed 3 times
View: New PagePopup • Select:BBCode
Could go lower. Still haven't reduced the firebox size. Maybe next week.
[nepathumb]50819[/nepathumb]
VigIIPeaBurner
 
Hot Air Coal Stoker Furnace: Keystoker Koker
Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
Other Heating: #2 Oil Furnace

Visit Hitzer Stoves