One Time Deal for a Glenwood Magazine
- dlj
- Member
- Posts: 1273
- Joined: Thu. Nov. 27, 2008 6:38 pm
- Location: Monroe, NY
- Hand Fed Coal Stove: Vermont Castings Resolute
- Baseburners & Antiques: Glenwood Baseheater #6
- Coal Size/Type: Stove coal
- Other Heating: Oil Furnace, electric space heaters
Glenwood Owners,
If anyone wants a magazine for a Glenwood base heater (the 118, #6 or #8 models) I'm getting things set up to make it happen.
The owner of an original Glenwood Base heater magazine is going to send it to the foundry. As soon as it arrives, I'll post here that it is ready to go. I will give all needed information of who to contact and whatever other details are needed.
There will be a window of a few weeks where anyone who wants one will be able to call the foundry and say how many they want. The foundry will tell each person how much it will cost them, each person pays the foundry directly. At the end of that couple weeks, the order time will be over, the parts will be cast, parts sent to those that want them and the original sent back to the owner. Case closed...
This seems like the only reasonable way to do this so nobody feels uncomfortable.
dj
If anyone wants a magazine for a Glenwood base heater (the 118, #6 or #8 models) I'm getting things set up to make it happen.
The owner of an original Glenwood Base heater magazine is going to send it to the foundry. As soon as it arrives, I'll post here that it is ready to go. I will give all needed information of who to contact and whatever other details are needed.
There will be a window of a few weeks where anyone who wants one will be able to call the foundry and say how many they want. The foundry will tell each person how much it will cost them, each person pays the foundry directly. At the end of that couple weeks, the order time will be over, the parts will be cast, parts sent to those that want them and the original sent back to the owner. Case closed...
This seems like the only reasonable way to do this so nobody feels uncomfortable.
dj
-
- Member
- Posts: 8601
- Joined: Sat. May. 24, 2008 4:26 pm
- Location: Chester, NY
- Hot Air Coal Stoker Stove: LL AnthraKing 180K, Pocono110K,KStokr 90K, DVC
- Hand Fed Coal Stove: Invader 2
- Baseburners & Antiques: Wings Best, Glenwood #8(x2) Herald 116x
- Coal Size/Type: Rice,
- Other Heating: Heating Oil CH, Toyotomi OM 22
Thx for organizing this.
- Sunny Boy
- Member
- Posts: 25721
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
Many thanks dj for all the work you put into making this happen.
Paul
Paul
- dlj
- Member
- Posts: 1273
- Joined: Thu. Nov. 27, 2008 6:38 pm
- Location: Monroe, NY
- Hand Fed Coal Stove: Vermont Castings Resolute
- Baseburners & Antiques: Glenwood Baseheater #6
- Coal Size/Type: Stove coal
- Other Heating: Oil Furnace, electric space heaters
OK, so I'll need to know how many magazines people want to talk to the foundry and see what the cost per will be.
I'm taking two, Simon wants one, There might be one more being asked for. Once I have a rough idea, I can let the foundry know and they can give me an idea of cost per part.
dj
I'm taking two, Simon wants one, There might be one more being asked for. Once I have a rough idea, I can let the foundry know and they can give me an idea of cost per part.
dj
- Pancho
- Member
- Posts: 906
- Joined: Sat. Feb. 01, 2014 4:00 pm
- Location: Michigan
- Baseburners & Antiques: Glenwood No. 8
- Coal Size/Type: Stove
- Other Heating: Jotul Firelight
I'll take one if it's not too much trouble.dlj wrote:OK, so I'll need to know how many magazines people want to talk to the foundry and see what the cost per will be.
I'm taking two, Simon wants one, There might be one more being asked for. Once I have a rough idea, I can let the foundry know and they can give me an idea of cost per part.
dj
- dlj
- Member
- Posts: 1273
- Joined: Thu. Nov. 27, 2008 6:38 pm
- Location: Monroe, NY
- Hand Fed Coal Stove: Vermont Castings Resolute
- Baseburners & Antiques: Glenwood Baseheater #6
- Coal Size/Type: Stove coal
- Other Heating: Oil Furnace, electric space heaters
Well, I won't know until I have an idea of how many people want one (or more). There are about 5 total requested right now. How many do you think you'll want?dhansen wrote:I am interested but I need to know approximately how many $$$ they will be going for.
Dennis
William - you out there? I haven't heard from you. You want 1 or more?
dj
One for now. Depending on price, maybe two.dlj wrote:Well, I won't know until I have an idea of how many people want one (or more). There are about 5 total requested right now. How many do you think you'll want?dhansen wrote:I am interested but I need to know approximately how many $$$ they will be going for.
Dennis
William - you out there? I haven't heard from you. You want 1 or more?
dj
Dennis
- Sunny Boy
- Member
- Posts: 25721
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
I'll take one for my #6. If price is low enough to fit my stove budget, I'll take more for my two 118's.
I have to have new grates cast for my range and I've still yet order 10 ton of coal.
Paul
I have to have new grates cast for my range and I've still yet order 10 ton of coal.
Paul
- Sunny Boy
- Member
- Posts: 25721
- Joined: Mon. Nov. 11, 2013 1:40 pm
- Location: Central NY
- Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
- Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
- Coal Size/Type: Nuts !
- Other Heating: Oil &electric plenum furnace
Bump for any others wanting a Glenwood magazine ?
Paul
Paul
- Kennebago
- Member
- Posts: 39
- Joined: Fri. Dec. 06, 2013 4:56 pm
- Location: Central MA, Woolwich, Maine
- Stoker Coal Boiler: Coming Spring 2014
- Baseburners & Antiques: Glenwood Oak / Home Grand Restoration Projects
- Other Heating: Arrgghh "Oil Boiler"
I am also looking for one for my #6...sent you a PM....have not heard from you but assume you got the PM
May want additional 1 or 2 depending on the price they end up
Thanks for taking this on
May want additional 1 or 2 depending on the price they end up
Thanks for taking this on
- dlj
- Member
- Posts: 1273
- Joined: Thu. Nov. 27, 2008 6:38 pm
- Location: Monroe, NY
- Hand Fed Coal Stove: Vermont Castings Resolute
- Baseburners & Antiques: Glenwood Baseheater #6
- Coal Size/Type: Stove coal
- Other Heating: Oil Furnace, electric space heaters
OK folk, this has been hanging there for a bit, at this point there are a total of 12 magazines spoken for.
Pancho - 1
dhansen - 1
involute - 1
Sunny Boy - 1
Merc300d - 1
Kennebago - 1
vfw3439 - 1
wsherrick - 2
coalnewbie - 1
dlj -2 (that's me..)
If I missed anyone, let me know ASAP. I'll be calling the foundry this week (hopefully tomorrow but one never knows what happens at work especially since I was on vacation last week). I'll find out the price an how the foundry wants to handle everything. Hopefully a date to be done by and if they want you all to pay them directly or how that is gong to work. Will post here with what I find out. Don't worry if you don't hear from me for a few days as I'll likely be up to my ears in alligators, as they say, this coming week...
dj
Pancho - 1
dhansen - 1
involute - 1
Sunny Boy - 1
Merc300d - 1
Kennebago - 1
vfw3439 - 1
wsherrick - 2
coalnewbie - 1
dlj -2 (that's me..)
If I missed anyone, let me know ASAP. I'll be calling the foundry this week (hopefully tomorrow but one never knows what happens at work especially since I was on vacation last week). I'll find out the price an how the foundry wants to handle everything. Hopefully a date to be done by and if they want you all to pay them directly or how that is gong to work. Will post here with what I find out. Don't worry if you don't hear from me for a few days as I'll likely be up to my ears in alligators, as they say, this coming week...
dj