Keystoker 105 Vent pipe/cfm fan

Keystoker 105 Vent pipe/cfm fan

PostBy: hall115 On: Wed Jul 30, 2008 8:47 pm

I see reference to someone using L-vent pipe for the direct vent keystoker 105. I would like to know if this is OK? The inside of the L-vent is stainless steel. Stuff was wicked expensive and I would like to use it. Also shutting down the unit. How do you do this? If I unplug it the whole thing shuts down including the direct vent. It would be great if someone who has used one could give me some advice. I have the thing ready to go. I ran a cold air return and ordered it with a 800CFM fan. I have it running four registers. I can't wait to see how it heats. I also had it ordered with a 10 inch top. I used the included block to stop it from blowing out the front. I was worried that it might not heat up enough to use such a big fan but I also wanted enough fan to blow the heat through the duct work. Anyone out there have anything with this big of a fan? Got my coal BIN full of coal and ready for upstate NY's next winter.


hall115@gmail.com


I could use a copy of the manual I already misplaced mine. Anyone got a PDF??
hall115
 
Stove/Furnace Make: keystoker
Stove/Furnace Model: 105000 BTU

Visit Lehigh Anthracite