Interior Insulation for DF 520

coldinmaine · Post by **coldinmaine** » Thu. May. 21, 2015 10:22 am

Where might I be able to purchase insulation boards for the inside of the base of an efm 520 df?

Post by **stoker-man** » Sat. May. 23, 2015 6:49 pm

I can help you with that. Maybe you didn't see my pm.

vermontday · Post by **vermontday** » Sat. May. 30, 2015 9:31 am

If you have an F.W. Webb near you, they stock high temp insulation board. Then get some fender washers from Home Depot.

Normally you could look at the pictures with descriptions on my thread for an efm with skid/bulk bags, but Flicker seems to be having a problem this morning.

I show in the pictures the base being insulated inside with high temp refractory board.

Hopefully Stokerman already helped you out.

vermontday · Post by **vermontday** » Sun. May. 31, 2015 2:07 pm

Flicker is working again. Here is a link to pictures that are in my EFM 520 with bulk skid feed thread;
http://www.flickr.com/photos/vermontday/441510120 ... 589020652/
Use the right arrow to go to pictures 15 and 16. Descriptions are at the bottom of each picture.