Cookin' With Coal

 
User avatar
Merc300d
Member
Posts: 506
Joined: Tue. Feb. 18, 2014 7:45 pm
Location: Charleston SC
Hand Fed Coal Stove: Glenwood 6 base heater
Baseburners & Antiques: Too many
Coal Size/Type: Nut
Other Heating: Oil base board

Post by Merc300d » Sun. Nov. 27, 2016 2:08 pm

Sunny Boy wrote:Looks wonderful Kevin !!!!!

And it looks like you very quickly got the hang of using that range . ;)

How'd the Thanks Giving dinner turn out ?

Paul
Paul. I'm must admit I turned into a chicken on turkey day. Providing thanksgiving dinner for 15 family members was too much pressure for me. The wife and both agreed not to chance it although there were some that I told I had planned on baking the turkey in the glenwood where slightly dissapointed. I'll continue to build confidence and surely will next year. I'll bake a chicken this week and see how it goes. :D


 
lobsterman
Member
Posts: 727
Joined: Tue. Sep. 28, 2010 7:51 am
Location: Cape Cod
Hand Fed Coal Stove: Chubby, 1980 Fully restored by Larry Trainer
Hand Fed Coal Furnace: Chubby Jr, early model with removable grates

Post by lobsterman » Sun. Nov. 27, 2016 5:48 pm

What could possibly go wrong?

 
User avatar
Sunny Boy
Member
Posts: 25728
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Mon. Nov. 28, 2016 12:42 pm

Merc300d wrote:
Sunny Boy wrote:Looks wonderful Kevin !!!!!

And it looks like you very quickly got the hang of using that range . ;)

How'd the Thanks Giving dinner turn out ?

Paul
Paul. I'm must admit I turned into a chicken on turkey day. Providing thanksgiving dinner for 15 family members was too much pressure for me. The wife and both agreed not to chance it although there were some that I told I had planned on baking the turkey in the glenwood where slightly dissapointed. I'll continue to build confidence and surely will next year. I'll bake a chicken this week and see how it goes. :D
Not chicken, Kevin, just smart! ;)

With all that's going on with entertaining and feeding 15 people, plus such a short time with the range in operation, that's not the time to be learning how your range's oven temps and refueling/ash shaking timing needs are over the course of a long baking session, and how that is affected by your system's draft strength for those outside temps. Better to spend more time learning the "how, what, and when" so as to make the, "learning curve" less like the shape of a hangman's noose !!! :D

Paul

 
User avatar
Merc300d
Member
Posts: 506
Joined: Tue. Feb. 18, 2014 7:45 pm
Location: Charleston SC
Hand Fed Coal Stove: Glenwood 6 base heater
Baseburners & Antiques: Too many
Coal Size/Type: Nut
Other Heating: Oil base board

Post by Merc300d » Mon. Nov. 28, 2016 1:32 pm

Yes yes yes and yes. I get there sooner or later

 
User avatar
Photog200
Member
Posts: 2063
Joined: Tue. Feb. 05, 2013 7:11 pm
Location: Fulton, NY
Baseburners & Antiques: Colonial Clarion cook stove, Kineo #15 base burner & 2 Geneva Oak Andes #517's
Coal Size/Type: Blaschak Chestnut
Other Heating: Electric Baseboard

Post by Photog200 » Sun. Dec. 04, 2016 9:48 pm

Grate change out day, it is official now burning coal until spring. Wooohooo, now I can be part of the thread again. :D
Randy

 
User avatar
Sunny Boy
Member
Posts: 25728
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Mon. Dec. 05, 2016 12:28 am

Welcome back to Easy Street. :D

Paul

 
User avatar
Sunny Boy
Member
Posts: 25728
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Sun. Dec. 11, 2016 7:59 am

Woke up yesterday to 10F, windy, and snowing. No weather to go out in for Christmas shopping. But, a coal range gives us an enjoyable alternative.

What better way to spend that kind of weather then to be by a coal stove and make a batch of orange marmalade for family Christmas presents, while enjoying that steady warmth. And no crowed roads, parking lots, and stores to have to put up with !!!! ;)

And a part jar left over that I got to sample it on bread. Would have shown it on the bread, too, but, it doesn't last long enough to get to that part. :D

Paul

Attachments

DSCN2956.JPG
.JPG | 112.3KB | DSCN2956.JPG
DSCN2961.JPG
.JPG | 128.8KB | DSCN2961.JPG


 
scalabro
Member
Posts: 4197
Joined: Wed. Oct. 03, 2012 9:53 am
Location: Western Massachusetts
Baseburners & Antiques: Crawford 40, PP Stewart No. 14, Abendroth Bros "Record 40"
Coal Size/Type: Stove / Anthracite.
Other Heating: Oil fired, forced hot air.

Post by scalabro » Sun. Dec. 11, 2016 8:07 am

Paul that looks delish as always...... :)

Holy crow Kevin! I did not know you fired that up I assumed it was "just" part of you collection! What is the phone number for ordering take out pizza pie ? :shock: :D

 
corey
Member
Posts: 1035
Joined: Fri. Nov. 14, 2014 11:14 am
Location: Southwest VA
Hand Fed Coal Stove: Buck Stove Hybrid
Coal Size/Type: Eastern KY bituminous

Post by corey » Sun. Dec. 11, 2016 8:12 am

Looks great Paul.

 
User avatar
Merc300d
Member
Posts: 506
Joined: Tue. Feb. 18, 2014 7:45 pm
Location: Charleston SC
Hand Fed Coal Stove: Glenwood 6 base heater
Baseburners & Antiques: Too many
Coal Size/Type: Nut
Other Heating: Oil base board

Post by Merc300d » Sun. Dec. 11, 2016 2:30 pm

[quote="scalabro"]Paul that looks delish as always...... :)

Holy crow Kevin! I did not know you fired that up I assumed it was "just" part of you collection! What is the phone number for ordering take out pizza pie ? :shock: :D[/quote

Looks great Paul !! I'm sorry to inform that I diconnected the cook stove. Despite it doing a good job of heating the house , I couldn't get those long burn times I needed. I'm out of the house for long hrs and I've come home to a cold stove more times than I could bare. I did however get 12 hr burn times on occasion. The wife can't or won't tend the stove likely because of her schedule. It was fun while it lasted. It will get reinstalled when I can fit into my kitchen renovation plans.

Scott. Pizza was great!! All the food I cooked on my range tasted better coming from this stove than any other. I will miss it for sure.

 
wilsons woodstoves
Member
Posts: 370
Joined: Mon. Dec. 16, 2013 7:55 pm
Baseburners & Antiques: Glenwood, Crawford, Magee, Herald, Others

Post by wilsons woodstoves » Sun. Dec. 11, 2016 3:54 pm

What the heck , youll be warmer and thinner. if you had the width you could put a tee in the flue and hook up both stoves. u need to get to living the good life, some reason the name paul comes into mind, what causes that???????????????? lol wilson

 
User avatar
Sunny Boy
Member
Posts: 25728
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Sun. Dec. 11, 2016 4:02 pm

Merc300d wrote:
scalabro wrote:Paul that looks delish as always...... :)

Holy crow Kevin! I did not know you fired that up I assumed it was "just" part of you collection! What is the phone number for ordering take out pizza pie ? :shock: :D[/quote

Looks great Paul !! I'm sorry to inform that I diconnected the cook stove. Despite it doing a good job of heating the house , I couldn't get those long burn times I needed. I'm out of the house for long hrs and I've come home to a cold stove more times than I could bare. I did however get 12 hr burn times on occasion. The wife can't or won't tend the stove likely because of her schedule. It was fun while it lasted. It will get reinstalled when I can fit into my kitchen renovation plans.

Scott. Pizza was great!! All the food I cooked on my range tasted better coming from this stove than any other. I will miss it for sure.
Kevin,
If you got 12 hour burns on occasion, then with that deeper firebox of your model E it should easily get consistent 12 hour burns and longer. If I remember, your E has about a 50% deeper firebox than my Sunny and 12 hour burns are the norm if I clear ash and reload it right. Often it goes longer than 12 hours if I don't use fast burning coal like TSC's Kimmels was last year.

When your ready, pm me and we can discuss some things to check/try, if you wish.

Paul

 
User avatar
Sunny Boy
Member
Posts: 25728
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Sun. Dec. 11, 2016 4:04 pm

wilsons woodstoves wrote:What the heck , youll be warmer and thinner. if you had the width you could put a tee in the flue and hook up both stoves. u need to get to living the good life, some reason the name paul comes into mind, what causes that???????????????? lol wilson
'

If I had to guess, I'd say it was because of something a-Paul-ing ! :D

Paul

 
User avatar
Photog200
Member
Posts: 2063
Joined: Tue. Feb. 05, 2013 7:11 pm
Location: Fulton, NY
Baseburners & Antiques: Colonial Clarion cook stove, Kineo #15 base burner & 2 Geneva Oak Andes #517's
Coal Size/Type: Blaschak Chestnut
Other Heating: Electric Baseboard

Post by Photog200 » Mon. Dec. 12, 2016 10:03 am

Sunny Boy wrote:
wilsons woodstoves wrote:What the heck , youll be warmer and thinner. if you had the width you could put a tee in the flue and hook up both stoves. u need to get to living the good life, some reason the name paul comes into mind, what causes that???????????????? lol wilson
'

If I had to guess, I'd say it was because of something a-Paul-ing ! :D

Paul
Too bad Merc300d had to call in the Paul-bearers...sorry couldn't resist. :shock:

Randy

 
User avatar
Sunny Boy
Member
Posts: 25728
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Mon. Dec. 12, 2016 10:30 am

Photog200 wrote:
Sunny Boy wrote:
If I had to guess, I'd say it was because of something a-Paul-ing ! :D

Paul
Too bad Merc300d had to call in the Paul-bearers...sorry couldn't resist. :shock:

Randy
:D :D :D

Paul


Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”